A 9.2mm (0.36 in high) RED six digit seven segment display. Ideal for displaying lap time.

The display is already soldered on a PCB with a pin header connector. A set of 300 mm long cables connects the display to the DLC-247 or JC-LED controllers.

Connections work as follow.


For the DLC-247:

  • Pins 1…16 of the display connect to pins 1…16 of connector A or B or C of the DLC-247
  • Pins A..C of the display connect to three of pins 17…20 of the DLC-247 (same connector used above)
  • Pin NC of the display is not used


For the JC-LED:

  • Pin S1 of the display connect to pin S4 of the LC-LED.
  • Pin S2 of the display connect to pin S5 of the LC-LED.
  • Pin S3 of the display connect to pin S8 of the LC-LED.
  • Pin S4 of the display connect to pin S3 of the LC-LED.
  • Pin S5 of the display connect to pin S1 of the LC-LED.
  • Pin S6 of the display connect to pin S6 of the LC-LED.
  • Pin S7 of the display connect to pin S7 of the LC-LED.
  • Pin S8 of the display connect to pin S2 of the LC-LED.
  • The six D pins of the display connect to six of the D1...D16 pins of the JC-LED

0.36" Six digit display for DLC-247 or JC-LED

  • Product Code: 0.36" Six digit display for DLC-247 or JC-LED
  • Availability: In Stock
  • £6.95


Available Options


Related Products

DLC-247

DLC-247

Please note: the DLC-247 controller is not available any more, due to come components being out of p..

£49.50

JC-LED

JC-LED

The JC-LED controller is a new USB board that combines: a JC32 controller (push buttons, togg..

£38.00