• Stepper motor movement
  • Digital and analog display
  • Backlight is available in white and amber
  • Fast needle response
  • Aluminum case
  • Smoked lens
  • Scale is in Celsius degrees


Installation


There is a 4-wires cable in the box that must be connected as follow:

  • The BLACK wire connects to the Pro-Gauge’s GND terminal
  • The RED and WHITE wires connect to the Pro-Gauge’s 12V terminal
  • The AMBER must be left disconnected if you want the white back-light. If you prefer the amber back-light, the wire must be connected to the 12V terminal.

The 2-wires cable must be connected as follow:

  •  The WHITE wire connects to the Pro-Gauge’s signal terminal S1…S6 (one of them)
  • The BLACK wire must be left disconnected.

In the box, you will also find a small capacitor that must be connected between the S1…S6 terminal of the Pro-Gauge used for the WHITE signal wire above and the GND terminal.

The blue jumper must be moved to position 5.

DEPO Racing 60mm water temperature gauge WA6037BLED

  • Product Code: DEPO Racing 60mm water temperature gauge WA6037BLED
  • £40.00