SymProjects Forum

General Category => General Discussions => Topic started by: abs on July 03, 2013, 08:50:02 am

Title: inverted scale with pro-gauge
Post by: abs on July 03, 2013, 08:50:02 am

hello did anyone solved an inverted scale with a gauge when using progauge

exemple: 0 percent is the max and 100 percent is the min


thanks

Title: Re: inverted scale with pro-gauge
Post by: Cristiano on July 03, 2013, 04:24:37 pm

when you configure the Pro-gauge, the 0% slider should be moved until the needle is on the MIN position of the gauge.

100% slider should be adjusted until the needle is on the MAX position.

I guess I am missing something.

Quote from: abs on July 03, 2013, 08:50:02 am

hello did anyone solved an inverted scale with a gauge when using progauge

exemple: 0 percent is the max and 100 percent is the min


thanks

Title: Re: inverted scale with pro-gauge
Post by: abs on July 03, 2013, 06:49:35 pm

yes I agree


but in this case the curb goes (top to bottom left). the other gauges i tried go top to bottom right .


that is one thing . the other thing the angle of the curb is almost vertical that reduces accuracy in games (shift of 5 to 10 unit).


these 2 things might not be related (?) . the main issue is accuracy of the output