SymProjects Forum
General Category => General Discussions => Topic started by: Stewart on August 21, 2013, 10:07:55 pm
-
Hi,
I'm sure this is a silly question with an obvious answer. The connecting pins on the pro race button adapter are in pairs but the rotary encoders have three pins.
I know it's the middle pin of the encoders that need to go to somewhere else but where on the button adapter?
Many thanks,
Rob. :)
-
im pritty sure the middle pin on the rotary encoders is Ground.
i found this on the site hopefully should be of some help.
http://www.symprojects.com/wp-content/uploads/ProRace_94CC/withdiodes.jpg
-
Hi.
not a silly question at all. I should make it more clear.
say that the rotary encoder is connected to buttons 1 & 2 of the button adapter.
the external pins of the rotary encoder connect to the pins on the top of the pairs 1&2 on the button adapter.
the middle pin of the rotary encoder connects to the bottom pin of the pair 1 or to the botton pin of pair 2 on the button adapter. choose one of the 2.
Please let me know if this is too confusing and I will try to explain better.
Regards
Cristiano
Hi,
I'm sure this is a silly question with an obvious answer. The connecting pins on the pro race button adapter are in pairs but the rotary encoders have three pins.
I know it's the middle pin of the encoders that need to go to somewhere else but where on the button adapter?
Many thanks,
Rob. :)
-
That makes sense now, many thanks for your swift response as ever Cristiano, and also thanks for the speed at which you deliver the items when I order stuff, very quick turn around, well done.
(Thanks grum as well for your response). :)
Rob.