SymProjects Forum

General Category => General Discussions => Topic started by: David91 on November 26, 2013, 10:53:11 am

Title: Rev Lights Configuration
Post by: David91 on November 26, 2013, 10:53:11 am

Hello.

Can anyone tell me their settings for rev lights?
I have 14 leds and I dont know how to configure the % of revs displayed on each LED.

David.  :)

Title: Re: Rev Lights Configuration
Post by: Cristiano on November 26, 2013, 06:05:39 pm

Hello.
which device are you using.
And which game?

thanks

Quote from: David91 on November 26, 2013, 10:53:11 am

Hello.

Can anyone tell me their settings for rev lights?
I have 14 leds and I dont know how to configure the % of revs displayed on each LED.

David.  :)

Title: Re: Rev Lights Configuration
Post by: David91 on November 26, 2013, 10:56:54 pm

Im using DLC 247...well the main game is rFactor and rFactor 2.

Title: Re: Rev Lights Configuration
Post by: Cristiano on November 29, 2013, 06:01:40 pm

May I ask if the problem is with connecting the LEDs to the DLC-247 or with the configuration of the software?

this page has the information that you probably need:

http://www.symprojects.com/dlc-247-configuration/

is the problem with anything specific?

thanks

Title: Re: Rev Lights Configuration
Post by: David91 on November 29, 2013, 09:45:04 pm

I know how to configure the LEDS, but I don't know the best settings :) or if someone has already configured the % for the revs for 14 LEDs.

Title: Re: Rev Lights Configuration
Post by: ItsDaPlumber on February 16, 2014, 06:49:25 am

It appears that illustration includes displays. I want to do the same thing as David. I have 20 LEDs to make up a rev array and not sure how to go about doing it.