SymProjects Forum
General Category => General Discussions => Topic started by: djspina on March 09, 2014, 04:25:57 pm
-
Hi all as the title I'm buying a Pro Gauge to run a speedometer of a BMW e36 in my simulator.
My question is, Does anyone have a diagram that explains how to mount?
I am an Italian and I'm writing with Google translator so I'm sure if the translation and perfect
(http://i1048.photobucket.com/albums/s380/Djspina/IMG_20140309_225712_zps472a7bdf.jpg)
(http://i1048.photobucket.com/albums/s380/Djspina/IMG_20140309_172023_zps929265da.jpg)
My sim http://www.youtube.com/watch?v=68ooVvVsox0&list=UUcpHKLOQWgcS9xsrbg64EDg
-
Look here for wiring diagram http://www.symprojects.com/forum/index.php?topic=38.msg114#msg114 ;)
-
I tried to make a pattern. Can you tell me if it is right?
(http://i1048.photobucket.com/albums/s380/Djspina/schema_zps9266f645.png)
-
That would be it,on blue connector pin 18 should be water temp and black connector pin 1 is fuel sensor..
Look here: read and scrolll down to see picture (1000 words ;) )
http://www.symprojects.com/forum/index.php?topic=787.msg5564#msg5564
-
Here I made a new pattern I hope that's right. I also gave you a look at the post of the link that I have posted.
One other thing but to turn on the orange LED speedometer I have to make a change in I with the pro-gauge light?
I repeat I am writing with Google Translate I do not know if I misspelling
(http://i1048.photobucket.com/albums/s380/Djspina/scheman2_zps798be221.png)
-
Your new scheme is OK but I do not understand next sentence (One other thing but to turn on the orange LED speedometer I have to make a change in I with the pro-gauge light? ) :)
-
You're right it is a problem with the google translator :-\
tried again to translate:
How do I turn on the orange LED speedometer?
Come on by themselves with the Pro-Gauge?
I've gotta make a change I get them to turn on?
(http://imageshack.us/a/img90/2853/20130603040653lls.jpg)
(http://i1048.photobucket.com/albums/s380/Djspina/57193_27_816_667034_zps386e108e.jpg)
-
Probably your fuel gauge will not work with pin 3 connected to ground in the black connector. just saying.
To the cluster ilumination simply connect the pin 2 of the white connector to 12+. Pin 2 White connector - Dimmer/Cluster light
-
Thanks for the reply. But to feed the orange lighting with the Pro-Gauge, the food or can I put a power supply to pin 2?
In the text there may be misspellings why I'm writing with Google Translate
-
Thanks for the reply. But to feed the orange lighting with the Pro-Gauge, the food or can I put a power supply to pin 2?
In the text there may be misspellings why I'm writing with Google Translate
i understand what u trying say. use a power supply for all cluster (12v+ and GND) and just put pin 2 of the white cluster to 12v+ (see the schematic picture). that should put light on the cluster.
-
Ok thank you :)
-
One last thing, to put safety before i make the order.
I'm buying items that are:
1) Pro-Gauge Controller + Power Supply.
2) 20 pin dual female splittable jumper wire.
3) USB Cable.
That's it? I need another?
-
One last thing, to put safety before i make the order.
I'm buying items that are:
1) Pro-Gauge Controller + Power Supply.
2) 20 pin dual female splittable jumper wire.
3) USB Cable.
That's it? I need another?
if you use a pc power supply, just order the pro-gauge and for the cluster you don't need the 20 pin dual female wire.
-
Ok thanks
-
Waiting for the arrival of the Pro-Gauge, I mount the speedometer...
(http://i1048.photobucket.com/albums/s380/Djspina/DSC00290_zps9ac39fe2.jpg)
(http://i1048.photobucket.com/albums/s380/Djspina/DSC00292_zpsc20951d1.jpg)