SymProjects Forum

General Category => General Discussions => Topic started by: bruzski on September 11, 2014, 11:11:35 am

Title: gauge values different after changing Pro-Gauge power supply to ATX
Post by: bruzski on September 11, 2014, 11:11:35 am

i finally got my fuel/temp gauges to work correctly on my BMWE36 cluster :)
but after changing the Pro-Gauge power supply to 12V 4.5Amp the gauge values are different on my BMWE36 cluster, and stop working correctly :-\ !! is this normal ???  

do i need to change the settings in simdash 6 again ? is it important the have the correct 12v powersupply ??  ::)

Title: Re: gauge values different after changing Pro-Gauge power supply to ATX
Post by: bruzski on September 11, 2014, 09:01:15 pm

resolved ;D

when changing the power supply, the voltage frequenties change i think and you need to modify the simdash values again  >:(

now my temp and fuel gauge work again  ;) ::)

Title: Re: gauge values different after changing Pro-Gauge power supply to ATX
Post by: ops16ml5 on October 01, 2014, 02:16:37 pm

Hi!

i have the problem that my fuel and water temps not working on the bmw cluster with the pro-gauge power cable.
can you say me your settings in sim dash?

Title: Re: gauge values different after changing Pro-Gauge power supply to ATX
Post by: bruzski on October 07, 2014, 04:17:20 pm

these are my fuel and temp settings and work perfect with AC, iRacing, Rfactor2 and Euro Truck Simulator 2

(http://s8.postimg.org/padfrmi91/temp.jpg) (http://s24.postimg.org/b76df38it/fuel.jpg)

(http://s1.postimg.org/xa1gmnspr/image.png) (http://s15.postimg.org/ngibn6oq3/dashboard.jpg)