SymProjects Forum

General Category => General Discussions => Topic started by: papadu93 on February 08, 2015, 04:35:08 am

Title: connection meter to the Pro-Gauge
Post by: papadu93 on February 08, 2015, 04:35:08 am

connection meter to the Pro-Gauge

hello all

I order a counter 406 and Pro-Gauge card.

and I have a problem I can not find the pin to the counter conection

  a Pro-Gauge map

here is the information on the meter

-Marque : Sagem
-REF : 6/32/3-27K6SA
Véhicule :
Marque : PEUGEOT
Modèle : 406 COUPE PHASE 1 406 Essence
Année : 19/09/1997
Alimentation : Essence
Moteur : RFV / XU10J4R
Boite : BE3/5S
Cylindrée : 1998
Puissance fiscale : 10
Puissance DIN : 130
Couleur : GRIS
Type Mine : MPE000AA5408

thank you for your help

Title: Re: connection meter to the Pro-Gauge
Post by: Jadran on February 13, 2015, 07:03:27 pm

Hi
I only have this and I hope it will help

406 SAGEM Dashboard
(http://i38.servimg.com/u/f38/16/17/86/37/406_sa10.jpg)

Title: Re: connection meter to the Pro-Gauge
Post by: papadu93 on February 17, 2015, 06:37:19 pm

thank you I managed

there is still a lot of work to me

(http://img.imagesia.com/fichiers/uk/image_imagesia-com_ukzi_large.jpeg) (http://imagesia.com/image_ukzi)
(http://img.imagesia.com/fichiers/uk/image-1_imagesia-com_ukzj_large.jpeg) (http://imagesia.com/image-1_ukzj)
(http://img.imagesia.com/fichiers/uk/image-4_imagesia-com_ukzk_large.jpeg) (http://imagesia.com/image-4_ukzk)
(http://img.imagesia.com/fichiers/uk/img-0001_imagesia-com_ukzp_large.JPG) (http://imagesia.com/img-0001_ukzp)
(http://img.imagesia.com/fichiers/uk/img-0002_imagesia-com_ukzm_large.JPG) (http://imagesia.com/img-0002_ukzm)
(http://img.imagesia.com/fichiers/uk/img-0003_imagesia-com_ukzo_large.JPG) (http://imagesia.com/img-0003_ukzo)
(http://img.imagesia.com/fichiers/uk/img-0004_imagesia-com_ukzn_large.JPG) (http://imagesia.com/img-0004_ukzn)
(http://img.imagesia.com/fichiers/uk/img-0005_imagesia-com_ukzl_large.JPG) (http://imagesia.com/img-0005_ukzl)

Title: Re: connection meter to the Pro-Gauge
Post by: papadu93 on April 26, 2015, 06:46:53 am

hello

hello

here is well on me at my cockpits 406

a question card pro gauge walking on the project because games?

Title: Re: connection meter to the Pro-Gauge
Post by: bigmarky on April 29, 2015, 04:05:58 am

it will work on project racing

not sure why it doesnt work on f1 2014

how'd you wire the illumination lights? did you just wire it to a 12v power or signal

Title: Re: connection meter to the Pro-Gauge
Post by: papadu93 on April 29, 2015, 04:21:09 am

hello
cabler for illumination lights I use the meter 12v

Title: Re: connection meter to the Pro-Gauge
Post by: papadu93 on May 03, 2015, 05:24:20 pm

edition 03/05/2015 [/ center]

Hello all.

 I You post the progress on the creation of my small cockpits.

 uses hardware information.


 Electronic equipment used.

A map LEO BODNAR.

 A pro card gauge

 A Shift Pro card.

GI Gear Indicator Max.

The button

 The other material Uses.

From MDF 18 mm

A 406 dashboard.

A counter 406.

2x Flat aluminum to Support G27. 100x100

3 Tube alu 30x30



 Here is the photo of the advanced.

(http://img.imagesia.com/fichiers/xc/image_imagesia-com_xc40_large.jpeg) (http://"http://imagesia.com/image_xc40")
(http://img.imagesia.com/fichiers/xc/image-1_imagesia-com_xc3z_large.jpeg) (http://"http://imagesia.com/image-1_xc3z")
(http://img.imagesia.com/fichiers/xc/image-2_imagesia-com_xc41_large.jpeg) (http://"http://imagesia.com/image-2_xc41")
(http://img.imagesia.com/fichiers/xc/image-3_imagesia-com_xc3x_large.jpeg) (http://"http://imagesia.com/image-3_xc3x")
(http://img.imagesia.com/fichiers/xc/image-4_imagesia-com_xc3w_large.jpeg) (http://"http://imagesia.com/image-4_xc3w")
(http://img.imagesia.com/fichiers/xc/image-5_imagesia-com_xc3y_large.jpeg) (http://"http://imagesia.com/image-5_xc3y")

I have a question on the card gauge pro

and he provided an update for the games market asseto corsa fuel gauge with the card