SymProjects Forum

General Category => General Discussions => Topic started by: bigmarky on April 22, 2015, 08:46:30 pm

Title: Will a suzuki TL1000S cluster work with pro-gauge- pics / wiring diagram posted
Post by: bigmarky on April 22, 2015, 08:46:30 pm

i got one for 25bux so i was like - yea i'll try it

besides soldering, what's the easiest way to connect a wire to the pins:

(http://s17.postimg.org/5sdtvc8b3/tls1.jpg)
(http://s24.postimg.org/llxo67dxh/tls2.jpg)
(http://s15.postimg.org/qj2u3xn63/TLS_Clocks_Wiring.jpg)

Title: Re: Will a suzuki TL1000S cluster work with pro-gauge- pics / wiring diagram posted
Post by: bigmarky on April 22, 2015, 09:00:15 pm

also should i wire the speedo cable to the #3 spot which says speed sensor +? or plug the positive 12v there

and plug the speedo readout to #14

though the tacho wires into #4

so u would normally think 3 speed 4 tacho

Title: Re: Will a suzuki TL1000S cluster work with pro-gauge- pics / wiring diagram posted
Post by: bigmarky on April 29, 2015, 04:07:17 am

everything works except the illumination only blinks one light doesnt light the gauges

Title: Re: Will a suzuki TL1000S cluster work with pro-gauge- pics / wiring diagram posted
Post by: H.Guedes on April 29, 2015, 06:03:28 pm

Hi marky. put pin 9 to +12v and you have now illumination ;)

Title: Re: Will a suzuki TL1000S cluster work with pro-gauge- pics / wiring diagram posted
Post by: bigmarky on April 30, 2015, 08:02:03 pm

yeah i did that and no dice...

not sure why it's not working it just flashes the FI light

i doubt all the bulbs are out but im going to just wire it separate and see what happens