SymProjects Forum

General Category => General Discussions => Topic started by: synaptik_1 on July 01, 2015, 08:06:51 pm

Title: DEPO Fuel Pressure Gauge Calibration Problem
Post by: synaptik_1 on July 01, 2015, 08:06:51 pm

I can't get my DEPO fuel pressure gauge (WA6067BLED) to zero properly with a 22uF50V cap and signal adapter installed as prescribed on the related symprojects page (http://www.symprojects.com/shop/depo-racing-60mm-fuel-pressure-gauge-wa6067bled/).  0% calibration on the configuration page is maxed out but the gauge only goes down to 5 PSI.  Any ideas?  The oil temp, oil pressure, and water temp gauges I've installed work great with Project Cars and GSC (oil & water temps only).

Also, I know that Project Cars (with 1.4 update applied) is supposed to support fuel pressure, but all of the cars I've driven so far (GT3 mostly) are stuck at 8 PSI, so which cars provide it?  Thanks in advance for any assistance

Title: Re: DEPO Fuel Pressure Gauge Calibration Problem
Post by: synaptik_1 on July 01, 2015, 08:12:00 pm

I meant WA5267BLED btw, I have the 52mm gauge