SymProjects Forum

General Category => General Discussions => Topic started by: nicutapa on June 16, 2016, 07:52:17 pm

Title: Dirt Rally ... problems in combination with SimCommander
Post by: nicutapa on June 16, 2016, 07:52:17 pm

Hello guys,
    I use GI Max and SPI-D and i can not use this hardware in combination with SimCommander. SimCommander use extradata=3 and for symproject is 1. What can i do ?

Thank you for any sugestion

Title: Re: Dirt Rally ... problems in combination with SimCommander
Post by: Cristiano on June 18, 2016, 02:30:30 pm

Hello.

you can duplicate the

<udp...

line, one for SimDash, one for SimCommander. like below:

<udp enabled="true" ip="127.0.0.1" port="20777" delay="1" extradata="3" />
<udp enabled="true" ip="127.0.0.1" port="20779" delay="1" extradata="1" />

Note that the port numbers have to be different.
I have left the default value 20777 for SimCommander.

Port number for SimDash has been changed to 20779 (you can choose different values)

you have to open the Dirt Rally configuration screen in SimDash, and change the port number to 20779 (or the value you chose) and restart SimDash.

this is all you have to do. let me know if you have doubts or something doesn't work.

Regards
Cristiano



one for SimCommander and one for SImDash.

Title: Re: Dirt Rally ... problems in combination with SimCommander
Post by: nicutapa on June 18, 2016, 06:19:16 pm

Thank youuuuuu. Everything is ok now.

Have nice weekend