SymProjects Forum
General Category => General Discussions => Topic started by: tryxinos on July 05, 2012, 12:19:09 pm
-
Hi guys, hi Christiano!
@ first sorry for my bad english.
I've got a problem with my fresh installed (completly new) RevBurner! I searched the whole forum and found two threads that are very similar:
1)
http://www.symprojects.com/forum/index.php?topic=167.0
MY GImax and SPI-D are still working fine too.
I*ve tested on two computers (both Win7 64bit), tested two USB cables, tested 8(!) different USB Ports (included USB 3.0), none of them works. I booted both PCs nearly 20x, without success. I've updated the Firmware to RevBurnerV2.0 without success. I've installed Microsoft Framework again and again, installed SimDash 1.3.5 und 1.3.6. Nothing helped.
If i plug the USB Cable(s) into the PC the: "dling dlong" appears!
This guy had got the similar problem:
http://www.symprojects.com/forum/index.php?topic=432.0
Maybe anyone can help? would be so nice ??? :)
PS: GIMAX und SPI-D are EPIC :o :o :o
best regards
Christoph
-
Hi guys, hi Christiano!
@ first sorry for my bad english.
I've got a problem with my fresh installed (completly new) RevBurner! I searched the whole forum and found two threads that are very similar:
1)
http://www.symprojects.com/forum/index.php?topic=167.0
MY GImax and SPI-D are still working fine too.
I*ve tested on two computers (both Win7 64bit), tested two USB cables, tested 8(!) different USB Ports (included USB 3.0), none of them works. I booted both PCs nearly 20x, without success. I've updated the Firmware to RevBurnerV2.0 without success. I've installed Microsoft Framework again and again, installed SimDash 1.3.5 und 1.3.6. Nothing helped.
If i plug the USB Cable(s) into the PC the: "dling dlong" appears!
This guy had got the similar problem:
http://www.symprojects.com/forum/index.php?topic=432.0
Maybe anyone can help? would be so nice ??? :)
PS: GIMAX und SPI-D are EPIC :o :o :o
best regards
Christoph
Hi.
When you upgrade the firmware, if the rev burner correctly detected by the Bootloader application? Can you complete the upgrade process?
-
(http://files.nu55.de/1.jpg)
(http://files.nu55.de/2.jpg)
(http://files.nu55.de/3.jpg)
(http://files.nu55.de/4.jpg)
??? :'(
Is it correct to UNPLUG the power supply?
-
I've updated again and it says now:
(http://files.nu55.de/5.jpg)
but i didn't do anything different :-\
edit: but this update process didn't change the result... GI MAX works perfect, RevBurner won't be detected...
-
When I upgrade the firmware the last message I get is "Verify completed".
Instead for you the last message is "Verify failure", which is not right.
Could you send me the .hex file you are trying to upload to the chip please?
I would like to check if it is corrupted.
you can send it to contact@symprojects.com
Thank you
Cristiano
-
After THIS Message nothing happens... i waited an hour or so, thinking: maybe it needs some time.
But after "Verify Started" the green bar don't move. It looks like the program crashes?!
edit: email with the .hex file is on the way :)
-
short update:
MAYBE my revburner is not 100% OK so Christiano will send me a new one! I will send mine back to him, so he can maybe found the problem and solve it.
Very nice e-Mail Partner, very nice service, and i hope the new one will work fine :)
I keep you updated.
PS: GI Max and SPI-D are soooo niiiice!! :o :o :o
i will never miss them again!!
(translation: ich will sie nie wieder hergeben!)
-
Cristiano sent me a new RevBurner. It works GREAT!
THANK YOU FOR YOUR FAST HELP :)
I'll send my old one back to you tomorrow!
regards,
Christoph
-
Hey Cristiano
I'm having an issue with one rev burner. I turned PC on as usual today and windows detected it as a bootloader device (or something similar) Anyway Simdash doesn't see it so I thought I'd reflash the software on the board.
When I open bootloader the board is recognised and flash is successful (I've flashed both versions of firmware) but the funny thing is no matter where the jumper is or even if it removed the bootloader still sees it and Simdash doesn't. Any ideas? oh by the way it's a V2.
The other Rev Burner and all other hardare is still working fine.
Thanks
Ricky
-
Hey Cristiano
I'm having an issue with one rev burner. I turned PC on as usual today and windows detected it as a bootloader device (or something similar) Anyway Simdash doesn't see it so I thought I'd reflash the software on the board.
When I open bootloader the board is recognised and flash is successful (I've flashed both versions of firmware) but the funny thing is no matter where the jumper is or even if it removed the bootloader still sees it and Simdash doesn't. Any ideas? oh by the way it's a V2.
The other Rev Burner and all other hardare is still working fine.
Thanks
Ricky
Hello.
Can you send send an email to contact@symprojects.com with your details (order number or email used for your order) so that I can verify what version of the board you have.
Thank you
Cristiano