SymProjects Forum

General Category => General Discussions => Topic started by: Denis Castilloux on August 06, 2012, 02:08:52 am

Title: Proshift led
Post by: Denis Castilloux on August 06, 2012, 02:08:52 am

Hi Christiano, hope everything going well.

Whit the pro shift can i use more than 1 led per ouput, if so, how and how many.

Denis  8)

Title: Re: Proshift led
Post by: Cristiano on August 06, 2012, 09:49:27 pm

In general more LEDs per output don't work very well.
You can try to put 2 (or maybe 3) LEDs in parallel. the brightness will be reduced because the same amount of current will flow through 2 LEDs instead of 1, so you will have to increase it in the PRo Shift configuration screen.

Because the 2 LEDs are never identical, it is possible 1 LED is brigher than the other. you have to try