SymProjects Forum

General Category => General Discussions => Topic started by: Enzo F. on December 31, 2012, 04:01:30 pm

Title: Bootloader problem / Sim Screen not working
Post by: Enzo F. on December 31, 2012, 04:01:30 pm

Hi,

I have been using the Sim Screen and the Pro Shift unit for a couple of days and it worked fine.
Now I put both in a powered USB-hub because of the short usb cables. It worked for a few hours but now my Sim Screen does not work anymore. Pto Shift still works with no problems with the USB hub. I can turn the Sim Screen on but there is not Welcome message. I even can not use the Bootloader anymore. If the screen is in programm mode the bootloader tells me that there is not screen connected so I can not do anything to get the screen to work...
I even used the screen in a normal USB port from the mainboard but nothing else is the result.

Can someone tell me what else I could do??? I hope the screen is not damaged. It seems that it works but gets no connection to bootloader or the SimDash programm and Windows tells me that there is a problem with connecting the hardware. Windows does not seem to recognize the Sim Screen.

Title: Re: Bootloader problem / Sim Screen not working
Post by: Cristiano on January 02, 2013, 03:12:53 pm

Hello.
Can you send an email to contact@symprojects.com
Please add your order number or  the email address you used when you placed the order.

thank you
Cristiano

Title: Re: Bootloader problem / Sim Screen not working
Post by: Enzo F. on January 20, 2013, 07:25:55 am

Thank you for your help.  :)