Messages

1

General Discussions / Re: DLC-247 config

« on: December 02, 2013, 06:08:24 pm »

you will need another dlc 24, you have 27 displays plus leds.  I have a dlc 247 display as well and I was able to configure 2 6 digit displays, 3 3 digit displays  1 2 digit display( a 3 digit but only using 2 digits)  and 8 leds.

I had to buy different displays than the ones supplied by symprojects for 2 of the 3 digit displays because of how the symproject displays are configured. The ones I bought had a separate pin for each led display segment. (8 plus ground)   I had to hook up 27 wires for each 3 digit display.. and wire some of the digits within the 3 digit display to different channels

lots of wires.

2

General Discussions / Re: Alex Alvarez's In-Depth Installation Guide for DLC-247 and Pro-Gauge

« on: November 18, 2013, 10:31:20 pm »

Nice dash and nice writeup

3

General Discussions / Re: Pro-Race LED's Too Bright

« on: November 06, 2013, 08:43:27 pm »

you could buy dimmer leds

4

General Discussions / Re: Pro Gauge power question

« on: October 07, 2013, 06:46:01 pm »

nice

5

General Discussions / Re: Pro Shift w/ rgb led

« on: October 04, 2013, 03:10:16 pm »

Don't know if it helps,  but I use tri color leds with the dlc-247. They have to be common anode.

6

General Discussions / My setup

« on: August 13, 2013, 04:16:15 pm »

Hello everyone, I figured I would share pictures of my setup. Its not real pretty,  but its a labor of love. I have had the frame for probabally 15 years but just recently got rid of the 21" crt and  added 3 screens and lots of symprojects goodies. The symprojects stuff is fantastic... I like to say its halfway done

here is what I started with and how it ended up, there is also a link to a short vid, sorry about the squeaky chair

http://www.youtube.com/watch?v=Vpzbbfh-LbQ

7

General Discussions / Re: How many gauges

« on: July 19, 2013, 04:44:38 pm »

I run a bunch of gauges and the lights were dim with the supply. Cristiano suggested this one ( if you are in the us)

http://www.ebay.com/itm/171029599812?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

cheap,  free shipping and it hooks right up to the board, now my lights aren't dim

8

General Discussions / Re: Do I need a 3rd wire for.............

« on: July 04, 2013, 07:33:45 pm »

If you set it for fuel % rather than gallons you dont have to change it for each cars fuel capacity

9

General Discussions / Re: My custom gauge WIP (shaun_king)

« on: June 28, 2013, 06:08:06 pm »

wow that's beautiful, amazing piece of work awesome job

10

General Discussions / Re: Nascar 2003 season (Papyrus)

« on: June 28, 2013, 06:03:46 pm »

It might work if you change the name of whatever no cd executable to nr2003.exe   

11

General Discussions / Re: which speedos and tachos to use with rev burner

« on: April 12, 2013, 12:03:08 am »

I used the autometer 4486 a bit pricy but it works well, it also keeps track of how many miles I have driven     3 3/8 diameter

I got it here

http://www.egauges.com/vdo_ind.asp?Type=Speedometer&Series=Ultra_Lite&PN=ATM-4486

12

General Discussions / 2 and 3 color led's

« on: March 31, 2013, 02:37:50 am »

Will these work with a proshift or a dlc-247?  They have multiple leads and several different colors inside one bulb

thanks
Scott

13

General Discussions / Re: rev burner

« on: March 31, 2013, 02:35:19 am »

The stuff I ordered took 8 or 9 days to get to Chicago, you should get a message when it ships

14

General Discussions / Re: cockpit

« on: September 19, 2012, 11:35:29 pm »

Awesome setup man, is that a cigarette lighter?