Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - left888

Pages: 1 [2] 3
16
General Discussions / 64 bit iRacing
« on: November 01, 2012, 08:06:17 am »
I just installed iRacings new build which included the 64 bit architect. However SimDash does not work, I take it only works 32bit? The rev burner and GI Max does not work either. Do you need to code these for 64 bit before they work?

17
General Discussions / Re: Questions regarding Rev Burner
« on: October 21, 2012, 03:30:44 am »
I purchased an Auto Gauge that has a 11,000 RPM max. That is what you need to look at. What kind of racing do you do and what RPM do you need. I exclusively iRace so 11,000 RPM was what I need. This works for 4,6 and 8 cylinders. I don't know whether 10 and 12 cylinders are supported to be honest.

18
General Discussions / Re: Rev Counter + Other Gauges
« on: October 12, 2012, 04:06:35 am »
work is still in progress. I have a prototype working. At the moment the project is on stand-by because I have been working on a new display, which will be ready in a week or two.

After that, I will be working 100% of my time on the controller, completing the testing and finishing off the software.

Regards
Cristiano

Thank you Cristiano, this is the hope we need. Whats a few more months anyways? :D

19
General Discussions / Re: Rev Counter + Other Gauges
« on: September 25, 2012, 06:05:00 pm »
It will definitely be completed. I have a prototype ready but the development has taken more time than expected, even because I also worked on other things.

Sorry for the delay

hi Cristiano,

I realize you are busy and everyone wants your new board for our cockpits. Is there any more news you can share about the new board?

Anything? A one sentence abbreviated teaser? Something to keep our hopes up! Please! As mentioned we understand you are busy and you bring excellent products to the Sim community and we have waited most patiently.  Just a bit of information to hold us over for another 6 or 8 months. Thank you.

20
General Discussions / Re: Rev Counter + Other Gauges
« on: September 11, 2012, 11:25:21 am »
It will definitely be completed. I have a prototype ready but the development has taken more time than expected, even because I also worked on other things.

Sorry for the delay

hi Cristiano,

I realize you are busy and everyone wants your new board for our cockpits. Is there any more news you can share about the new board?

21
General Discussions / Re: GI Max Gear Indicator
« on: July 21, 2012, 02:00:17 pm »
SimDash is the software we designed for the Rev Burner, GI Pro, GI Max, SPI-D, Pro Shift, SimScreen and DLC-247 boards.

The SimDash installer will download any additional library if required (Microsoft .NET Framework and C++ Runtime).

When SimDash starts, it will check if a newer version is available. If you have Windows Firewall enabled you could get a warning message for this. Download it Here


22
General Discussions / Re: Rev Counter + Other Gauges
« on: July 14, 2012, 09:47:35 am »
This sounds so good Cristiano, we have been waiting for a long time for this good news. Can't wait to see the finish product.

23
General Discussions / Re: Happy New Year
« on: January 02, 2012, 05:19:12 pm »
Happy New Year to everyone

24
General Discussions / Re: Rev Counter + Other Gauges
« on: December 21, 2011, 09:03:32 am »
Very nice Mike, where did the dash come from? Could you tell us about the gauge's, for example are there oil pressure, engine temp etc .. I am working on my rig http://www.symprojects.com/forum/index.php?topic=402.0 and a dash is looking very good. I am overwhelmed with so many choices ATM.

25
General Discussions / Re: My Rig #1
« on: December 20, 2011, 01:52:19 am »
thanks Jadran

26
General Discussions / Re: Rev Counter + Other Gauges
« on: December 20, 2011, 01:51:56 am »
I appreciate your hard work, as does everyone else. This sim community is thankful for the work you do Cristiano and people like Derek Speare as well. Merry Christmas and a Happy Race way.

27
General Discussions / Re: My Rig #1
« on: December 19, 2011, 07:24:13 pm »
Thanks Mortos for the comments and the link. I live with other people but I am the King of the Castle :)  and the room is sound proof or fairly close, you can still hear some bass upstairs, like an earthquake :D

28
General Discussions / My Rig #1
« on: December 19, 2011, 03:44:22 am »
Hi guys,

 I began researching rigs in January of 2010 and it really opened my eyes to the possibilities out there. Myself and two friends built the frame over a two month period putting in a couple hours here and there. One design that I kept coming back to was the Zalem rig. Built out of the Country of Spain, I liked it's simplicity and it's unique design. The originator had put a blueprint on the net and I modified his plans to suit my own. I would like to thank this gentleman for providing these plans freely to us,  I believe he has updated his design and has had several new versions.

I got my Rev Burner and GI Max a week or two ago and have my tach running smoothly. My rig has been a WIP for some time now (aren't they always) I wanted to share some photos of it with you. BTW I want to order another rev burner for a Speedometer but finding a suitable Speedometer is becoming more challenging then I thought. I live in Western Canada in the Province of Alberta, does anyone know where I can find one, even if it has to be shipped?

I have a whole room dedicated to Sim racing, my plan is to have my room painted during the winter and posters and memorabilia put up. The walls are rather barren at the moment.  I am waiting for a Pro sequential shifter and Track Boss Button Box from Derek Speare. At this point the rig has been Powder Coated. I will be building a console along the left side of the rig. Above the keyboard is a 19" monitor with iSpeed telemetry display.

The sound system on rig #1 is built from older components and newer inexpensive components. At the heart of the system is a 12" sub woofer from Velodyne I have a Pioneer VSX-1017TXV-K, A/V amp along with Polk Audio and KEF Speakers. A Dayton APA 150 power amplifier and two Aura bass shakers

I have a second rig from Sim-Seats, it is rather bare at the moment but we use it for the Forza series.













































29
General Discussions / Re: SiimDash 1.3.5
« on: December 19, 2011, 03:26:38 am »
I will download it and give it a try,thank you for your continuous support.

30
General Discussions / Re: Nothing working
« on: December 13, 2011, 04:43:59 am »
I will be looking into getting another Rev burner for a Speedometer, finding one here in Canada might be a challenge. I will start looking soon. Thanks everyone for the help on my Tachometer.

Pages: 1 [2] 3
hit counter