Rev Burner and R34 cluster

[perkabrod]

questerymj, any chance you could take photo of how you connected it? I'm on my way home from work and will go get my S13 cluster on the way home.
Bottom line, I have NO IDEA what so ever how this stuff works. All I know is that I have 2x rev burners and a S13 cluster

I have seen the guide on symprojects and have a basic electronics knowledge but I have never seen a cluster irl so in case you have a photo of the back of your cluster that shows how you connected it please post it here

I noticed a new firmware was posted in another thread... Seems like great support around here!

[questerymj]

http://i.imgur.com/JGDPo.jpg[/img]]
Of course mate...But I don't know how much does this can help you.

I only can said, you must find out the power feed (+12V and GND), speed output and revcounter out pin in your connectors.

You can connect +12V and GND from one of the rev burner to your cluster to power the cluster control unit. Then connect the S1 of both rev burner to rev counter and speedo(the one use for speedo need to update certain firmware). All I had done is connect 4 wires. I'm very lucky that dear Jardran had find out all of these for me...

And for the new firmware, I get to 165km/h of 180 km/h with it today. If Cristiano do some more tweak it will be perfect. I think this will work for your S13 cluster too because they are both made my nissan...

[perkabrod]

Thanks questerymj!

I took photos of my cluster and it looks like nothing else I've seen 
I will now post photos and keep everything in the thread I started a few days ago:
http://www.symprojects.com/forum/index.php?topic=452.0