SimDash 1.3.6 Beta

[NI0X]

Any solution?

I am looking into this right now.

Could you send me your DLC-247 configuration file please? So I can reproduce your exact situation...

You can save the DLC-247 configuration clicking "Export..." in the DLC-247 configuration screen.

Have you done the tests using Lfs?

Thank you
Cristiano

I tested it in LFS, here is the XML

[Cristiano]

Any solution?

I am looking into this right now.

Could you send me your DLC-247 configuration file please? So I can reproduce your exact situation...

You can save the DLC-247 configuration clicking "Export..." in the DLC-247 configuration screen.

Have you done the tests using Lfs?

Thank you
Cristiano

I tested it in LFS, here is the XML

Thank you for sending the file.

The fuel LED doesn't blink because it is not configured correctly.
The LED blinks when the blink condition is TRUE and also the condition for which the LED is turned ON but be TRUE.

If you consider LED A in your configuration: LED A is configured to be turned ON when FUEL % is >= 5.6 and in the blinking settings it is set to blink SLOWLY when Fuel % is between 5.2 and 5.6

But when Fuel % is between 5.2 and 5.6 the LEDs is OFF, so it doesnt blink.

PRobably what you want is:

LED ON when Fuel % is >= 5.2
Blink SLOW ON when Fuel % is between 5.2 and 5.6

This way the LED blinks when value between 5.2 and 5.6 and stop blinking (but the LED is still ON) when Fuel % is > 5.6

if you want I can send you the modified configuration file.

Regards
Cristiano

[pabletti]

I'm doing my first tests with dlc247 and rfactor 1 and 2. Do not work the pit request, speed limiter,full beam and ignition lights, is a beta error?? The other functions are working properly.

Sorry for my english.

In the 1.3.6 version those lights still not working. In rFactor2 the yellow flag light is always on.

[NI0X]

Thank you for sending the file.

The fuel LED doesn't blink because it is not configured correctly.
The LED blinks when the blink condition is TRUE and also the condition for which the LED is turned ON but be TRUE.

If you consider LED A in your configuration: LED A is configured to be turned ON when FUEL % is >= 5.6 and in the blinking settings it is set to blink SLOWLY when Fuel % is between 5.2 and 5.6

But when Fuel % is between 5.2 and 5.6 the LEDs is OFF, so it doesnt blink.

PRobably what you want is:

LED ON when Fuel % is >= 5.2
Blink SLOW ON when Fuel % is between 5.2 and 5.6

This way the LED blinks when value between 5.2 and 5.6 and stop blinking (but the LED is still ON) when Fuel % is > 5.6

if you want I can send you the modified configuration file.

Regards
Cristiano

Thank you, that was the advise I needed

[papadu93]

hello I would like to know
fuel management
management of engine temperature and oil for its Serat on the map via rev burne