A 38 mm (1.5in high) RED seven segment display.

The display is already soldered on a PCB with a pin header connector. A set of 300 mm long cables connects the display to the JC-LED controller.


This is how the display is connected to the JC-LED controller:

  • Pins 1...8 of the display connect to pins S1...S8 of the JC-LED
  • Pin A of the display connects to one of the D1...D16 pins of the JC-LED (choose one pin)
  • Pin NC of the display is not used

1.5" display for JC-LED

  • Product Code: 1.5" display for JC-LED
  • £7.45


Related Products

JC-LED

JC-LED

The JC-LED controller is a new USB board that combines: a JC32 controller (push buttons, togg..

£34.00