SymProjects Forum
General Category => General Discussions => Topic started by: karldulle on November 01, 2011, 03:22:39 am
-
Greetings Cristiano! A pro-shift rev-burner spi-d user ( and totally thrilled)
... Ok I have pro-shift, all WAS working fine last week.IT was excellent having a caution flag light up my dash!. NOW all works EXCEPT yellow flag in Iracing... I do not run other sims at this time..
I have 1 light for fuel warning it works when below 10 % A second light for water temp warning it is working.. 8 for a progressive brake indicator it is working.. And the remaining lights all for caution indicator (yellow) All light light when setup, and as I said it WAS all working excellently... It may have broke with beta, or last release I dont know....
I am running newest version,, and should also tell you it really doesn't list version number anywhere in software.. that I can find? Thank's for your attention as always Cristiano! Included my setup, but as I said it was all working fine 8 days ago... Also I did upgrade firmware before I ever finished installing it, and it worked fine after that obviously..
-
Hi.
so is the problem with the yellow flag?
-
yes
-
yes
thanks.
and has it never worked in past?
I will check anyway because if I remember correctly the code for the yellow flag works differently than the other flags.
Cheers
-
no It worked fine 8 days ago .. ALL Settings worked..... NOW only yellow caution flag is not working...
-
I also used the box to look for data , and it did not indicate yellow when yellow was out... It seemed to indicate everything else properly..
-
I also used the box to look for data , and it did not indicate yellow when yellow was out... It seemed to indicate everything else properly..
Thanks.
Do you remember of any update for IRacing in the last 8 days?
-
no updates that i recall , but one comes today or tom!
Only thing I MAY have updated is your software...
-
no updates that i recall , but one comes today or tom!
Only thing I MAY have updated is your software...
Right.
so probably the yellow flag worked with SimDash 1.3.3 (the version number is on the bottom right corner of the application) and stopped working with SimDash 1.3.4.
SimDash 1.3.4 has a brand new plugin for IRacing ( a lot of more data. www.symprojects.com/go/simdata to see what is available).
And the yellow flag is probably broken. I will investigate and fix it.
thanks
Cristiano
-
More bad news
I loaded up LFS and all other settings are working,,, except NO YELLOW flags, same as Iracing
-
Now I have removed new simdash installed older version, and still no functions on yellow flag in iracing or LFS
-
just got proshift today, no yellow flag working in iracing
sim dash 1.3.4, in the view data it doesnt detect yellow state
-
thanks everybody.
I will fix the yellow flag in IRacing.
Live for speed doesn't support the yellow flag so it is correct if it is not displayed.
Cristiano
-
Cristiano, Here's a loop for you.... it works in ROAD RACING not in OVALS, so, maybe it is not your end... I ran an RR and it worked as it is supposed to! But Still does not work in Ovals....
Anyone else get these results?
-
i'll test mine out as i only tried ovals
-
Cristiano, Here's a loop for you.... it works in ROAD RACING not in OVALS, so, maybe it is not your end... I ran an RR and it worked as it is supposed to! But Still does not work in Ovals....
Anyone else get these results?
thanks.
Maybe it is IRacing that doesn't output the flag for the oval.
I will investigate anyway if there is something specific for ovals in the API.
thanks
Cristiano
-
Cristiano it worked when I first installed.. ALL functions were proper.. Than I did update for buttons... and broke.. Now I have reflashed back to original and still no OVAL yellows in Iracing... Road Races work fine, and EVERYTHING works properly in RFACTOR..
My guess is somehow update to firmware is the culprit.... Karl
-
Hi Everyone! i have race iracing truck oval last night, and yellow was working, i'm using 1.3.3 and 4 buttons setting
Cya 8)
-
Well after flashing back to original, and running new simdash I have no flags at all in iracing... other things do work in iracing,,, And everything works in rfactor..
Christiano do you have any ideas on what else I could do, as others seem to have no issues, and I have gone to not working at all in Iracing... I bought this just for Iracing... Cheerz Karl
-
Well after flashing back to original, and running new simdash I have no flags at all in iracing... other things do work in iracing,,, And everything works in rfactor..
Christiano do you have any ideas on what else I could do, as others seem to have no issues, and I have gone to not working at all in Iracing... I bought this just for Iracing... Cheerz Karl
if the other stuff work in IRacing and the LEDs work correctly with the other simulator, I can't think of any reason why the flags should not work in IRacing.
Reading the other messages it seems that the flags are not outputed in oval tracks. is it possible they work in some tracks and don't work in others?
it also would be interested if you opened the "View data" dialog in SimDash (from the top menu).
that dialog shows all the data that is coming from the simulator. Can you see the flags there? I think can't. my feeling is that IRacing is not outputting the flags state.
-
Ok only way to do this really is host a session, and thats $ but I did open one up to test at the moment... oval with data open.. it reads green only.. no black no yellow it does not detect them.. all other data appears to be present
-
I also hosted a road session, and same as oval, no data showing in box for yellow blue or black green works and all other expected data appears
-
I also hosted a road session, and same as oval, no data showing in box for yellow blue or black green works and all other expected data appears
thank you for doing the tests.
I will check the IRacing plugin again to see if I missing something.
I will also post a message in the IRacing developer's forum if I can't find anything.
I will try to fix this in the next release of SimDash.
thanks
Cristiano
-
I also have had no luck with the Yellow flag. I have tested on a couple of ovals and I can confirm that Green and Black are working.
@karledulle in iR you can use the Spectate / Ghost Sessions to do some testing vs paying for hosted. Also if you didn't already know, you can alt + tab out of the session and make changes to Simdash and rejoin for testing changes to SD. I didn't know this at first and was quiting the Test sessions each time and starting a new! I'm saving a lot of time now! lol
-
I also have had no luck with the Yellow flag. I have tested on a couple of ovals and I can confirm that Green and Black are working.
@karledulle in iR you can use the Spectate / Ghost Sessions to do some testing vs paying for hosted. Also if you didn't already know, you can alt + tab out of the session and make changes to Simdash and rejoin for testing changes to SD. I didn't know this at first and was quiting the Test sessions each time and starting a new! I'm saving a lot of time now! lol
Yeah when I first installed it worked great, and that was how I tested it.. My guess is 1.3.4 is where it was lost.... I just figured i'd spring for actual sessions to see if it made a difference... DEPRESSING and now I see end of NOV is closer to end of DEC.. yeay... just really bites when it was all working fine..
-
I am investigating the problem with the yellow flag.
SimDash 1.3.4 is using the new IRacing API but v. 1.3.3 was using the old one, where the flag worked.
I can post the link for downloading SimDash 1.3.3 if anybody wants it, until this bug is fixed.
thanks
-
No going back to old version I lose other features, but thanks... Any update on new release?
-
No going back to old version I lose other features, but thanks... Any update on new release?
it should be end of next week.
But before I'd like to post a test version. I have changed few things in the IRacing plugin and I wanted to check if it works better.
I have checked with the IRacing's developers if I am making mistakes when I extract the state of the flags but everything is all ok.
I have been told the flags don't work well when you are testing a track or practicing. Only during the race they work well all the time.
Anyway let's see if the test version I will post works better. I will post it in 2-3 days.
thanks
Cristiano
-
be glad to test if youd like a volunteer..
Grats on the feature story!
Lots of Youtube stuff!
Karl
-
Thank you for the info im my tread,
But I don't get why I should connect more than one - and one + in Order to get the rev counter and the speedometer working as I think all +'s and -'s should all be connected internally, or am I wrong (quite likely ;D)
-
sorry, I posted in wrong tread
-
Hi Cristiano!
I need some Help, I installed my proshift and it works great, however, when I'm online (Rfactor) the full beam and Pit leds don´t work while offline they work perfectly..I´ve tried 2 different mods and the problem continues to happen...
Any suggestions of how to fix that?
Thanks
Fernando
-
Hi Cristiano!
I need some Help, I installed my proshift and it works great, however, when I'm online (Rfactor) the full beam and Pit leds don´t work while offline they work perfectly..I´ve tried 2 different mods and the problem continues to happen...
Any suggestions of how to fix that?
Thanks
Fernando
Hello.
I am afraid I can't fix it. the problem is that full beam and Pit light are not supported by the rFactor API. they should not work at all.
But I found a work around to make them work when playing online. That was the best I could get and thought that just offline was better than nothing.
Regards