SymProjects Forum

General Category => General Discussions => Topic started by: questerymj on March 14, 2012, 07:03:36 am

Title: Rev burner can't get top speed in speedo meter
Post by: questerymj on March 14, 2012, 07:03:36 am: I maket his thread to prevent Cristiano miss my question.:P

http://www.symprojects.com/forum/index.php?topic=442.0

Even I drag the pulse to maxinum(67184) in simdash test mode only can drive my speedo meter to 80 km/h(max 180 km/h in speedo meter). How do I get rev burner to drive it to full range?
Title: Re: Rev burner can't get top speed in speedo meter
Post by: Cristiano on March 14, 2012, 05:16:14 pm: Problem is the rev burner can't generate pulses as quickly as the dashboard needs.

Tomorrow I am going to send you a new firmware. I don't know if it will work but it is worth trying.
Today I don't have the time sorry.

Speak tomorrow.

Cristiano
Title: Re: Rev burner can't get top speed in speedo meter
Post by: questerymj on March 15, 2012, 02:04:03 am: Thank you Cristiano! Wait for your new firmware.:)
Title: Re: Rev burner can't get top speed in speedo meter
Post by: Cristiano on March 15, 2012, 05:42:55 pm: Here it is:

http://dl.dropbox.com/u/3544050/firmware.rar

I don't know if it will work, I couldn't test it.
Title: Re: Rev burner can't get top speed in speedo meter
Post by: questerymj on March 16, 2012, 12:55:17 pm: Cristiano, IT'S GREAT!:D:D:D:D

Now 67164 can drive the speedo meter to 165km/h(maxinum is 180 km/h).
Can you change the firmware a little more to make it to fill the full range?
Title: Re: Rev burner can't get top speed in speedo meter
Post by: Cristiano on March 18, 2012, 07:48:15 pm: try this one:

http://dl.dropbox.com/u/3544050/RevB.rar

If you are lucky you will be able to reach 180 Km/h but if you push it too high there is a possibility that SimDash freezes.

Regards
Cristiano
Title: Re: Rev burner can't get top speed in speedo meter
Post by: perkabrod on March 18, 2012, 08:01:35 pm: Is it possible to order a custom firmware? :)
I just posted in the Nissan S13 about a guy who made a frequency converter to make his Nissan S14 cluster work on the S13.
I didn't get half of it when he talked about the waves and stuff but if you have a read maybe you could give answer or offer me a firmware for my revburner speedo
Title: Re: Rev burner can't get top speed in speedo meter
Post by: Cristiano on March 19, 2012, 04:46:28 pm: Quote from: perkabrod on March 18, 2012, 08:01:35 pm
Is it possible to order a custom firmware? :)
I just posted in the Nissan S13 about a guy who made a frequency converter to make his Nissan S14 cluster work on the S13.
I didn't get half of it when he talked about the waves and stuff but if you have a read maybe you could give answer or offer me a firmware for my revburner speedo

Hi.

Do you have a link to the discussion of the guy who make the frequency converter?

Thanks
Cristiano
Title: Re: Rev burner can't get top speed in speedo meter
Post by: questerymj on March 19, 2012, 05:23:12 pm: Thank you Cristiano!

Now rev burner can drive my speedo to max in only 36600. I just need to deal with the gear position indicator LEDs ( can'r light them by Pro shift, maybe need higher voltages. Normal LEDs works with Pro shift) and i will get a perfect result I dream of.

Thanks for your great customer service and making ourracing life more joyful!
Title: Re: Rev burner can't get top speed in speedo meter
Post by: Cristiano on March 19, 2012, 05:35:45 pm: Quote from: questerymj on March 19, 2012, 05:23:12 pm
Thank you Cristiano!

Now rev burner can drive my speedo to max in only 36600. I just need to deal with the gear position indicator LEDs ( can'r light them by Pro shift, maybe need higher voltages. Normal LEDs works with Pro shift) and i will get a perfect result I dream of.

Thanks for your great customer service and making ourracing life more joyful!
What LEDs are you trying to use for the gear position?
Title: Re: Rev burner can't get top speed in speedo meter
Post by: perkabrod on March 19, 2012, 08:57:36 pm: Quote from: Cristiano on March 19, 2012, 04:46:28 pm
Do you have a link to the discussion of the guy who make the frequency converter?

Yes, actually just noticed it was for S15 but anyway... the build is here, hope you find it interesting:
http://www.freshalloy.com/forums/showthread.php?t=179595
Title: Re: Rev burner can't get top speed in speedo meter
Post by: questerymj on March 20, 2012, 02:17:59 am: Quote from: Cristiano on March 19, 2012, 05:35:45 pm
What LEDs are you trying to use for the gear position?

There are already 6 gear indicator LEDs soldered in the cluster PCB board. They are big ones (maybe 8mm I guess) and not the removable bulbs been used on other lamps/indicator. So I check the circuit and try to light them directly from harness connector legs (they are connect to gear position switch directly, not MCU) but failed.

Because these LEDs are shared negative, I think the best way is remove them and soldner some 5mm LEDs( fit to pro shift) with polarity opposite. Will test this when I have time:)
Title: Re: Rev burner can't get top speed in speedo meter
Post by: Cristiano on March 20, 2012, 05:34:31 pm: Quote from: questerymj on March 20, 2012, 02:17:59 am
Quote from: Cristiano on March 19, 2012, 05:35:45 pm
What LEDs are you trying to use for the gear position?

There are already 6 gear indicator LEDs soldered in the cluster PCB board. They are big ones (maybe 8mm I guess) and not the removable bulbs been used on other lamps/indicator. So I check the circuit and try to light them directly from harness connector legs (they are connect to gear position switch directly, not MCU) but failed.

Because these LEDs are shared negative, I think the best way is remove them and soldner some 5mm LEDs( fit to pro shift) with polarity opposite. Will test this when I have time:)

the LEDs connected to the Pro Shift share the positive...
Title: Re: Rev burner can't get top speed in speedo meter
Post by: questerymj on March 21, 2012, 02:04:48 am: Yes, but the leds on cluster PCB share negative...so I decide to dissolder them , change to normal 5mm leds with opposite polarity them they share positive.:P
Title: Re: Rev burner can't get top speed in speedo meter
Post by: questerymj on March 23, 2012, 02:11:40 am: I dissolder all gear position indicator leds and isolate the circuit...the result is nice.:)

http://www.youtube.com/watch?v=Inr8_2nQk4A&feature=youtu.be