Messages

1

General Discussions / Re: Assetto Corsa Support

« on: August 29, 2014, 06:13:54 pm »

snip...

i start a game my rpm counter stays at max, speed counter stays at zero and the gi-max has only one light on.

+1 unfortunately.

Pro-guage same issue here RPM/Speedo a/a.

tyvmia Christiano. 

2

General Discussions / Re: Sunpro white face gauges

« on: March 06, 2014, 07:06:38 pm »

Hello.
Do you have a link to the product's pages?
it might be useful for other users...

thank you
Cristiano
#

Hi there Christiano.  

This is what i managed to find.
http://www.sunpro.com/

and...

http://www.summitracing.com/search/brand/sunpro

3

General Discussions / Re: Assetto Corsa Support

« on: March 03, 2014, 09:40:47 pm »

Hi there Christiano.

I'm just wondering if you plan on implementing more data/gauge outputs from Assettocorsa.

There's a post on the ac forums under shared memory iirc that states: pressures, temps etc. someone has implemented.
http://www.assettocorsa.net/forum/index.php?threads/z1-dashboard-software.6705/ it's post #2.

I don't know exactly how simdash gets the info but i thought it was by way of, the shared memory(sry for assuming).

tyvmia.
you're products are awesome mafrien' and so is support. 

paulie...

4

General Discussions / Re: Assetto Corsa Support

« on: January 13, 2014, 10:53:27 pm »

hi , on the second page of this thread Cristiano says to click on the config button next to asseto corsa and it will tell me what to do , there is no config button . my Monsta works but only the leds at both ends of the Monsta .

The config button Cristiano talks of may be the one on the main page of SymDash.

Where it says "Connected Devices",
there is a two words on the right(not buttons as such).

1 is "Configure" and below it, the other is "Disable".

So whatever Devices you have connected, you can either disable or configure them.
Pressing configure, takes you to a page where you can test the parameters of each device.

5

General Discussions / Re: Assetto Corsa Support

« on: January 13, 2014, 09:01:25 pm »

@ Cristiano . when I go in simdash , ( click simulator ) there is no config button next to assetto corsa . thanks

any news ?

Hi there bp.  

You don't need to configure anything.
With Pro-Gauge connected, AssettoCorsa will output the data and it will show on your clocks(RPM, Speed, Fuel etc.)

6

Show off your build / Re: My WIP dashboard / cockpit

« on: January 12, 2014, 09:27:23 pm »

Do not let confuse the numbers on cluster and numbers on the connector ...

If you disassembling connector will see numbers on connector..

EDIT 2:

If you do not have the connectors used numbers as printed on the cluster

Thankyou Jadran, that clears things up for me.

Use the pinout of these pictures that i took to help others users

Thankyou also H.G.

What can i say... the pics are awesome and very clear.

Again guys, thankyou both for your help.

EDIT:
Ok guys, i have a slight problem...

I Connected only pin 1 to fuel sensor and the pin 4 to speed sensor(black connector), but the fuel level gauge sometimes moves and then seems stuck.
So for me the fuel gauge is not functioning properly, everything else does.

Do i need the OBC to make fuel consumption needle work.??
Anyone have the fuel level gauge settings for 25,50,75% etc. of cfg screen in progauge.??

Any help would be greatly appreciated.
Thankyou everyone for all the help you've already given.  

7

Show off your build / Re: My WIP dashboard / cockpit

« on: January 10, 2014, 12:38:34 pm »

snip...

Today I disassembled everything...

Hi Jadran.  
Hi H.G 

Yesterday i picked up a BMW 3.18ti cluster, i managed to get the White, Blue and Black wire loom plugs included.
Just a quick.??

When i look @ the rear of the clocks from left to right, i see the white socket on the left and moving across i then see the blue and black socket.
But when i look closely at the sockets i notice that the pin position numbers don't match the picture above.

ie. White Socket above:
Top... from the left, pic has pin #01 and #14   ---  mine from the top left is #26 and #13

Bottom... from the left, pic has pin #13 and #26   ---  mine from the bottom left is #14 and #01.

Sooo...
Should i make the connections using the exact "pin numbers" above, not caring where the actual pins are located on my sockets.??

Or should i make the connections of the wires using the exact, positions above, not caring where the pin numers are on my sockets.??

I hope this makes sense mafrien'.

tyvmia...

8

General Discussions / Re: Assetto Corsa Support

« on: January 03, 2014, 06:16:31 pm »

you can already do that.
if you minimize the application it goes in the system tray and keeps running.

regards
Cristiano

Yeah i know, i keep hitting close instead of minimise.  
I'm just so used to configuring my other apps that way so i don't close them by mistake.  

9

General Discussions / Re: Assetto Corsa Support

« on: January 03, 2014, 04:30:41 pm »

Hello.

this document:

http://www.symprojects.com/go/simdata

show exactly what data is supported by each game.

Regards
Cristiano

Hi Cristiano.  
Merry xmas and happy new year.

Sorry to be a beggar mafrien'.
Is there any chance that when we hit the redX at the top right of the Application(SimDash),
instead of closing/exiting the program, it minimises to system tray and keeps running.??  

Don't know how many times i've forgot and been caught out by this.
No biggie, just thought i would ask.

Again mafrien',
thankyou for your oustanding support.

10

General Discussions / Re: Can anyone help me - BMW-E46-SMG-M3 Wiring.??

« on: December 12, 2013, 02:56:08 am »

It can be used  but you need a e36 cluster to for do that. i read here in the forum a topic with some explanation of the transformation.

The topic: http://www.symprojects.com/forum/index.php?action=;topic=532.0

Thankyou for the post H.G.
got an e36 on it's way.

11

General Discussions / Re: Can anyone help me - BMW-E46-SMG-M3 Wiring.??

« on: December 08, 2013, 08:24:25 pm »

Unfortunately it is not possible to run this cluster (and most of the after 2000 years) with the Pro-Gauge or Rev Burner because it use the CAN BUS protocol.
I hope that Cristiano in the near future resolve this  

Thanx for the help Jadran.
It won't go to waste.

I'll canibilise it.

12

General Discussions / Can anyone help me - BMW-E46-SMG-M3 Wiring.??

« on: December 08, 2013, 06:50:35 pm »

Hi there folks.

Anyone have a wiring diagram or know of a place where i can get one for a BMW clock cluster:
Specifically a... "BMW-E46-SMG-M3" and the year is "2001-2006".??

I'm just waiting on it being delivered next 48hrs(tue 10th 2013).
but, i will update this post with pics of the rear when it arrives.

I really appreciate your help guys.

tyvmia.

13

General Discussions / Re: Thankyou for Supporting Assetto Corsa mafrien'.

« on: December 02, 2013, 04:03:54 pm »

Christiano... thankyou very much mafrien' for the new version(3) of simdash.

Again, i'm lost for words... i cannot thank you enough bud.

I hope you and the admin here in the forum(the unsung hero's) have a very merry christmas and a happy new year.

This also goes out to all my fellow gentlemen/gals, sim racers.

paulie...

14

General Discussions / Re: AC Support - Thankyou :)

« on: November 26, 2013, 03:48:16 pm »

Thankyou very much Cristiano.

This will for sure make a big difference to AC mafrien'.
I cannot thank you enough.!!

15

General Discussions / Re: new project help needed

« on: November 22, 2013, 02:48:37 pm »

hey guys!

i need your help.
i will order an pro-gauge an will conect them to an BMW E36 Dashboard.
i play race07 and i dont know, what data race07 can give out to the dash.
i will use speed, rpm, oil temp an fuel level

what data can race07 give out?

does the pro-gauge work with race07?

Race07 will give all that data and more and yes the pro-gauge works right off the bat with Race07.
I'm using it with all simbin titles incl. Race07+expansions.