Toggle switch specs for JC32 Joystick Controller

[Nick05]

Hi all,

Just purchased a JC32 Joystick Controller along with some rotary switches and push button switches (thanks for speedy delivery btw  ) and I would like to add some toggle switches which leads me on to my question.......

what volt / amp specs should the toggles be ? I know I need spst on/off but there are so many different volt amp types I am a bit lost 

Thanks in advance,

Nick.

[Cristiano]

hi.
there is virtually no current flowing through the switch that any switch will work fine.

you can double check here what you will decide to buy, and I will confirm that it will work.

Regards
Cristiano

Hi all,

Just purchased a JC32 Joystick Controller along with some rotary switches and push button switches (thanks for speedy delivery btw  ) and I would like to add some toggle switches which leads me on to my question.......

what volt / amp specs should the toggles be ? I know I need spst on/off but there are so many different volt amp types I am a bit lost 

Thanks in advance,

Nick.

[Nick05]

Hi Cristiano, Thank you for your reply...........

I would like to be able to use these ones http://www.ebay.co.uk/itm/271104191854?var=570127019605&ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

Will they be ok ?

[Cristiano]

I think it will work but I am not sure about the LED.

the LED works at 12V but the JC32 only has 5V

Hi Cristiano, Thank you for your reply...........

I would like to be able to use these ones http://www.ebay.co.uk/itm/271104191854?var=570127019605&ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

Will they be ok ?

[Nick05]

I managed to nip into town and grab some, I have them installed and although the LED's are lighting up when the switch is toggled to "ON" but the switch itself is not registering ?
I have them wired correctly and also the correct switch numbers are assigned in the "Toggle switch" configuration menu and I am also using the debug option but cant seem to get the switch itself to work ?

[Cristiano]

are you sure they are wired correctly. do they come with any documentation?

can you describe the pins and how they are connected?

I managed to nip into town and grab some, I have them installed and although the LED's are lighting up when the switch is toggled to "ON" but the switch itself is not registering ?
I have them wired correctly and also the correct switch numbers are assigned in the "Toggle switch" configuration menu and I am also using the debug option but cant seem to get the switch itself to work ?

[Nick05]

Thought it would be easier to draw a pic rather than explain 

[H.Guedes]

Probably that + and - is for the Led no?  try use instead the - and acc. Because this switch have the common ground ( for the switch and the led). But it's hard to say because i dont know that for sure. (My switch works this way i told you)

[Nick05]

Probably that + and - is for the Led no?  try use instead the - and acc. Because this switch have the common ground ( for the switch and the led). But it's hard to say because i dont know that for sure. (My switch works this way i told you)

Hi,

I tried your suggestion but still no luck, with your configuration the LED stays on constant, with the way I had it in the diagram the LED only comes on when the switch is toggled to ON  

[H.Guedes]

The ebay link in the topic is the same of the switch you have? I will try discover how they work and tell you something

[Nick05]

The ebay link in the topic is the same of the switch you have? I will try discover how they work and tell you something

Yes they are exactly the same, Thank you for your help, its much appreciated 

[Nick05]

Well in my haste to get these toggles working I have some how manage to fry one side of my controller      (If I plug a switch into said side I get nothing, if I plug that same switch into the other side it works)

Cristiano do you offer some kind of repair service or do I need to buy a new one ?

[Cristiano]

Please send me an email at contact@symprojects.com

Well in my haste to get these toggles working I have some how manage to fry one side of my controller      (If I plug a switch into said side I get nothing, if I plug that same switch into the other side it works)

Cristiano do you offer some kind of repair service or do I need to buy a new one ?