« previous next »
Pages: [1] 2

Author Topic: 1.3.4 final version  (Read 44570 times)

Denis Castilloux

  • Jr. Member
  • **
  • Posts: 81
    • View Profile
1.3.4 final version
« on: October 28, 2011, 02:42:30 am »
Hi! Christiano

I'm probably the only one who did not see it on the October 22, but when there is something new just like final version of 1.3.4. It should be posted here first and or at the same time as the web site. I never go on the web site, i'm following everything from the forum.

Denis  8)
Logged
“UNDERSTEER” is when you hit the fence with the front of the car.
“OVERSTEER” is when you hit the fence with the rear of the car.
“HORSEPOWER” is how fast you hit the fence.
“TORQUE” is how far you take the fence with you.

Jadran

  • Full Member
  • ***
  • Posts: 132
    • View Profile
    • Email
Re: 1.3.4 final version
« Reply #1 on: October 28, 2011, 09:10:19 am »
You are not alone  ;D
Logged

Jadran

  • Full Member
  • ***
  • Posts: 132
    • View Profile
    • Email
Re: 1.3.4 final version
« Reply #2 on: October 28, 2011, 11:54:23 am »
Question about SimDash v.1.3.4
In the previous version when minimized SimDash was in the system traybar and now it is only in the taskbar.
How can I move in trybar?

Thanks
Logged

Denis Castilloux

  • Jr. Member
  • **
  • Posts: 81
    • View Profile
Re: 1.3.4 final version
« Reply #3 on: October 28, 2011, 07:43:31 pm »
Hi Christiano!

Remember when we discuss certain issue with the beta version 1.3.4, was not able to set control for VHR, its still the same.

One thing i notice at that time the double proshift (see .jpg) so it's the same with the final version, i did an uninstal of 1.3.4 and reinstall 1.3.3 and the result is i dont have the double proshift, i have the same thing as Jadran mention in is post.

Thank
Denis  8)
Logged
“UNDERSTEER” is when you hit the fence with the front of the car.
“OVERSTEER” is when you hit the fence with the rear of the car.
“HORSEPOWER” is how fast you hit the fence.
“TORQUE” is how far you take the fence with you.

Cristiano

  • Administrator
  • Hero Member
  • *****
  • Posts: 1360
    • View Profile
    • SymProjects
    • Email
Re: 1.3.4 final version
« Reply #4 on: October 29, 2011, 11:31:50 pm »
Quote from: Denis Castilloux on October 28, 2011, 07:43:31 pm
Hi Christiano!

Remember when we discuss certain issue with the beta version 1.3.4, was not able to set control for VHR, its still the same.

One thing i notice at that time the double proshift (see .jpg) so it's the same with the final version, i did an uninstal of 1.3.4 and reinstall 1.3.3 and the result is i dont have the double proshift, i have the same thing as Jadran mention in is post.

Thank
Denis  8)

Check what I suggested to Jadran. it could work for you too.
I think Windows remembers that you plugged in a Pro Shift without the button and then one with the buttons and it gets confused I think.
If you disinstall the Pro Shifts (how I suggested to Jadran) and stick with the same firmware, you shouldn't see the double pro shift again.

Cheers
Cristiano
Logged

Denis Castilloux

  • Jr. Member
  • **
  • Posts: 81
    • View Profile
Re: 1.3.4 final version
« Reply #5 on: October 30, 2011, 12:22:52 am »
Quote from: Cristiano on October 29, 2011, 11:31:50 pm
Quote from: Denis Castilloux on October 28, 2011, 07:43:31 pm
Hi Christiano!

Remember when we discuss certain issue with the beta version 1.3.4, was not able to set control for VHR, its still the same.

One thing i notice at that time the double proshift (see .jpg) so it's the same with the final version, i did an uninstal of 1.3.4 and reinstall 1.3.3 and the result is i dont have the double proshift, i have the same thing as Jadran mention in is post.

Thank
Denis  8)

Check what I suggested to Jadran. it could work for you too.
I think Windows remembers that you plugged in a Pro Shift without the button and then one with the buttons and it gets confused I think.
If you disinstall the Pro Shifts (how I suggested to Jadran) and stick with the same firmware, you shouldn't see the double pro shift again.

Cheers
Cristiano


Hi Christiano!

It's not working, i'm back on 1.3.3, doing so i got my pedal back under other (VHR,Race07)

Thank anyway

Denis  8)
Logged
“UNDERSTEER” is when you hit the fence with the front of the car.
“OVERSTEER” is when you hit the fence with the rear of the car.
“HORSEPOWER” is how fast you hit the fence.
“TORQUE” is how far you take the fence with you.

Cristiano

  • Administrator
  • Hero Member
  • *****
  • Posts: 1360
    • View Profile
    • SymProjects
    • Email
Re: 1.3.4 final version
« Reply #6 on: October 30, 2011, 12:25:22 pm »
Quote from: Denis Castilloux on October 30, 2011, 12:22:52 am
Quote from: Cristiano on October 29, 2011, 11:31:50 pm
Quote from: Denis Castilloux on October 28, 2011, 07:43:31 pm
Hi Christiano!

Remember when we discuss certain issue with the beta version 1.3.4, was not able to set control for VHR, its still the same.

One thing i notice at that time the double proshift (see .jpg) so it's the same with the final version, i did an uninstal of 1.3.4 and reinstall 1.3.3 and the result is i dont have the double proshift, i have the same thing as Jadran mention in is post.

Thank
Denis  8)

Check what I suggested to Jadran. it could work for you too.
I think Windows remembers that you plugged in a Pro Shift without the button and then one with the buttons and it gets confused I think.
If you disinstall the Pro Shifts (how I suggested to Jadran) and stick with the same firmware, you shouldn't see the double pro shift again.

Cheers
Cristiano


Hi Christiano!

It's not working, i'm back on 1.3.3, doing so i got my pedal back under other (VHR,Race07)

Thank anyway

Denis  8)

Ok. I will investigate.
But how is it if you don't use the firmware with the buttons?
Logged

papadu93

  • Jr. Member
  • **
  • Posts: 98
    • ICQ Messenger - 3375543
    • Yahoo Instant Messenger - [Premier Сasual Dating Verifie
    • View Profile
    • [Premier Сasual Dating Verified Maidens]
    • Email
Re: 1.3.4 final version
« Reply #7 on: November 01, 2011, 07:42:10 pm »
bonjour a tous voila je suis en train de mettre un compteur de bmw e36 ou plus
je voudrait savoir si la mise a jour ser a maitre un compteur diesel


Hello everyone here I'm putting a meter or more bmw e36
 I would like to know if the update ser has a master meter diesel
Logged

ramall79

  • Approved Newbie
  • *
  • Posts: 21
    • View Profile
    • Email
Re: 1.3.4 final version
« Reply #8 on: November 03, 2011, 10:24:53 pm »
I dont know you guys but i cannot use any more v1.3.4 as it is freezing after some seconds. I returned to v1.3.3 and no problem on this version...everthing works ok with v1.3.3

How about you guys?
Logged

Cristiano

  • Administrator
  • Hero Member
  • *****
  • Posts: 1360
    • View Profile
    • SymProjects
    • Email
Re: 1.3.4 final version
« Reply #9 on: November 04, 2011, 05:50:11 pm »
Quote from: ramall79 on November 03, 2011, 10:24:53 pm
I dont know you guys but i cannot use any more v1.3.4 as it is freezing after some seconds. I returned to v1.3.3 and no problem on this version...everthing works ok with v1.3.3

How about you guys?

Hi.
When SimDash 1.3.4 starts it creates a file with name ErrorLog.txt in the folder where it is installed.

Could you send that file to me please? it could  contsain some useful information.

Does the application freeze always. and has it always freezed?

Can you check if disconnecting some devices it works well. Or if you play a different game...


thank
Cristiano
Logged

ramall79

  • Approved Newbie
  • *
  • Posts: 21
    • View Profile
    • Email
Re: 1.3.4 final version
« Reply #10 on: November 04, 2011, 06:52:04 pm »
Hi Cristiano,

Quote
Could you send that file to me please? it could  contsain some useful information.
ErrorLog.txt attached....

Quote
Does the application freeze always. and has it always freezed?
The 1st week no but than after yes. I uninstall and install again...now i am running v1.3.3.

Always freeze no matter if there is a game or not, even when i test on the simdash for example, i go to RevBurner and click on test @ 50% etc....it will freeze.

thx

Ramon
« Last Edit: November 05, 2011, 08:14:55 am by ramall79 »
Logged

Cristiano

  • Administrator
  • Hero Member
  • *****
  • Posts: 1360
    • View Profile
    • SymProjects
    • Email
Re: 1.3.4 final version
« Reply #11 on: November 05, 2011, 11:34:49 pm »
Quote from: ramall79 on November 04, 2011, 06:52:04 pm
Hi Cristiano,

Quote
Could you send that file to me please? it could  contsain some useful information.
ErrorLog.txt attached....

Quote
Does the application freeze always. and has it always freezed?
The 1st week no but than after yes. I uninstall and install again...now i am running v1.3.3.

Always freeze no matter if there is a game or not, even when i test on the simdash for example, i go to RevBurner and click on test @ 50% etc....it will freeze.

thx

Ramon



Thanks.
Would you mind to try this version of SimDash please?

http://dl.dropbox.com/u/3544050/Sd.zip

I made have made some cahnges.

thanks
Logged

ramall79

  • Approved Newbie
  • *
  • Posts: 21
    • View Profile
    • Email
Re: 1.3.4 final version
« Reply #12 on: November 06, 2011, 09:19:55 am »
Thanks i will try and let you know...

Logged

ramall79

  • Approved Newbie
  • *
  • Posts: 21
    • View Profile
    • Email
Re: 1.3.4 final version
« Reply #13 on: November 06, 2011, 09:15:58 pm »
Cristiano,

I test it out with LFS, rFactor & iRacing...the Simdash is working good and did not crash at all...I do not know what you did but it is not crashing or freezing... ;D


Just a question how to make proshift work with iRacing?

Thx

Ramall
Logged

Cristiano

  • Administrator
  • Hero Member
  • *****
  • Posts: 1360
    • View Profile
    • SymProjects
    • Email
Re: 1.3.4 final version
« Reply #14 on: November 06, 2011, 09:21:02 pm »
Quote from: ramall79 on November 06, 2011, 09:15:58 pm
Cristiano,

I test it out with LFS, rFactor & iRacing...the Simdash is working good and did not crash at all...I do not know what you did but it is not crashing or freezing... ;D


Just a question how to make proshift work with iRacing?

Thx

Ramall

Thank you for testing the software.
I will include the changes I have made in the next version of SimDash. They are related to the code that handles the USB communications.

Regarding IRacing, there is nothing particular you should do. what data are you trying to use?

thanks
Logged
Pages: [1] 2
« previous next »
 

hit counter