Author Topic: SimDash 1.3.6 Beta  (Read 64788 times)

Cristiano

  • Administrator
  • Hero Member
  • *****
  • Posts: 1360
    • View Profile
    • SymProjects
    • Email
Re: SimDash 1.3.6 Beta
« Reply #15 on: February 09, 2012, 07:00:00 pm »
I am trying to reproduce the problem with the settings not being saved, but I can't.

Please, can anybody experiencing the problem tell me exactly what they do, what simulators/hardware they try to configure so I can look for something more specific?

Thank you
Cristiano

bredita

  • Approved Newbie
  • *
  • Posts: 39
    • View Profile
    • Email
Re: SimDash 1.3.6 Beta
« Reply #16 on: February 09, 2012, 11:46:56 pm »
the settings stuck until I exit the app.

I have had it running for hours now, and am about to go to sleep.
I just closed simdash (using the x in the top corner) just now, went to the forum to see if there were any comments about his.
When I started simdash again my settings were still there :)

I dont know what caused it. the only difference I can think of is that teamspeak,  x-sim profiler and x-sim sender were not running now.
They probably were running the last time, when I had the problem with settings disappearing. I dont see how that could influence simdash though.

and one more difference - now I have not messed with profiles. last time, when the settings were missing, I had renamed profile 1 to iracing and saved it. I had also tried rfactor2 just before I noticed the problem.
Now the profile is called "profile 1" and I havent messed with it at all.

Cristiano

  • Administrator
  • Hero Member
  • *****
  • Posts: 1360
    • View Profile
    • SymProjects
    • Email
Re: SimDash 1.3.6 Beta
« Reply #17 on: February 10, 2012, 10:27:17 am »
the settings stuck until I exit the app.

I have had it running for hours now, and am about to go to sleep.
I just closed simdash (using the x in the top corner) just now, went to the forum to see if there were any comments about his.
When I started simdash again my settings were still there :)

I dont know what caused it. the only difference I can think of is that teamspeak,  x-sim profiler and x-sim sender were not running now.
They probably were running the last time, when I had the problem with settings disappearing. I dont see how that could influence simdash though.

and one more difference - now I have not messed with profiles. last time, when the settings were missing, I had renamed profile 1 to iracing and saved it. I had also tried rfactor2 just before I noticed the problem.
Now the profile is called "profile 1" and I havent messed with it at all.


Thank you, very helpful.

I will keep investigating.

Regards


Mike0001

  • Approved Newbie
  • *
  • Posts: 10
    • View Profile
    • German Race07 Simracing
    • Email
Re: SimDash 1.3.6 Beta
« Reply #18 on: February 11, 2012, 08:21:16 am »
After restarting the tool my settings are always set to default. so i have to reconfigure simdash everytime.


I have just realized that if you reduce SimDash to the Systray, then right click the icon e choose "Exis", the settings are not saved.

Is this your case?

Thanks


Yes exactly in ver 1.3.5 the settings were always saved/restarted. imade a profile ans exported it. but now i always have to load it after startup. maybe there will be a possibility to autoload last profile again.

THX Mike
to finish 1st you have to finish first

Cristiano

  • Administrator
  • Hero Member
  • *****
  • Posts: 1360
    • View Profile
    • SymProjects
    • Email
Re: SimDash 1.3.6 Beta
« Reply #19 on: February 11, 2012, 10:41:05 pm »
Thank you for testing the profiles.

I have made some changes to the beta:

http://dl.dropbox.com/u/3544050/SimDash.1.3.6.Beta.zip

and it would be great if it was tested.

If still the settings are not saved when the application is closed, I have added an option to the menu to force the saving of the settings, before you close the application (File->Save settings).

The option is just temporary but it will help me to understand where the problem is.

So please if it doesn't save automatically, use the menu option and tell me if it works.

thnak you


iRacer88

  • Approved Newbie
  • *
  • Posts: 24
    • View Profile
    • Email
Re: SimDash 1.3.6 Beta
« Reply #20 on: February 12, 2012, 02:18:04 am »
Thanks for fixing the iRacing Fuel % issue!!!


Mike0001

  • Approved Newbie
  • *
  • Posts: 10
    • View Profile
    • German Race07 Simracing
    • Email
Re: SimDash 1.3.6 Beta
« Reply #21 on: February 12, 2012, 09:47:52 am »
hi,
the save settings function works well for me.

I imported my profile (using GI Max, SPI-D, ProShift and Simscreen).
I choosed save settings.
After restarting, all settings from profile 1 were load again.

Good work.

Mike
to finish 1st you have to finish first

Cristiano

  • Administrator
  • Hero Member
  • *****
  • Posts: 1360
    • View Profile
    • SymProjects
    • Email
Re: SimDash 1.3.6 Beta
« Reply #22 on: February 12, 2012, 02:00:51 pm »
hi,
the save settings function works well for me.

I imported my profile (using GI Max, SPI-D, ProShift and Simscreen).
I choosed save settings.
After restarting, all settings from profile 1 were load again.

Good work.

Mike

Great, thank you.

And if you don't save using the menu option but leave SimDash save the settings when you close the application, dows it work?

thanks


Mike0001

  • Approved Newbie
  • *
  • Posts: 10
    • View Profile
    • German Race07 Simracing
    • Email
Re: SimDash 1.3.6 Beta
« Reply #23 on: February 12, 2012, 07:37:35 pm »
i changed some settings and closed without saving manually and after restarting it was like before. fine

but i only tested on case.

Mike
to finish 1st you have to finish first

Cristiano

  • Administrator
  • Hero Member
  • *****
  • Posts: 1360
    • View Profile
    • SymProjects
    • Email
Re: SimDash 1.3.6 Beta
« Reply #24 on: February 12, 2012, 10:01:39 pm »
i changed some settings and closed without saving manually and after restarting it was like before. fine

but i only tested on case.

Mike

do you mean it didn't save?

thank you


makuwaido

  • Approved Newbie
  • *
  • Posts: 25
    • View Profile
    • Email
Re: SimDash 1.3.6 Beta
« Reply #25 on: February 13, 2012, 06:33:13 am »
Thanks for the updates. I think you should add the option of dont blink to the option of different blink stages. Like for example, when making a shift array, they dont blink. Mine is set so that when they reach 95% RPM they are all turned on and when they reach 99% RPM another light turns on.It would be nice to have all of them blink when they get to 99% RPM.

Cristiano

  • Administrator
  • Hero Member
  • *****
  • Posts: 1360
    • View Profile
    • SymProjects
    • Email
Re: SimDash 1.3.6 Beta
« Reply #26 on: February 13, 2012, 03:41:58 pm »
Thanks for the updates. I think you should add the option of dont blink to the option of different blink stages. Like for example, when making a shift array, they dont blink. Mine is set so that when they reach 95% RPM they are all turned on and when they reach 99% RPM another light turns on.It would be nice to have all of them blink when they get to 99% RPM.

I think you can do that.

If you open the DLC-247 configuration dialog and inport the attached file, I have configured a LED to turn on when RPM% is 95 and then it starts blinking fast when RPM% is 99.

I think that is what you would like to do.

regards
Cristiano


makuwaido

  • Approved Newbie
  • *
  • Posts: 25
    • View Profile
    • Email
Re: SimDash 1.3.6 Beta
« Reply #27 on: February 13, 2012, 05:13:36 pm »
Thanks for the updates. I think you should add the option of dont blink to the option of different blink stages. Like for example, when making a shift array, they dont blink. Mine is set so that when they reach 95% RPM they are all turned on and when they reach 99% RPM another light turns on.It would be nice to have all of them blink when they get to 99% RPM.

I think you can do that.

If you open the DLC-247 configuration dialog and inport the attached file, I have configured a LED to turn on when RPM% is 95 and then it starts blinking fast when RPM% is 99.

I think that is what you would like to do.

regards
Cristiano



What about the Pro Shift?

Cristiano

  • Administrator
  • Hero Member
  • *****
  • Posts: 1360
    • View Profile
    • SymProjects
    • Email
Re: SimDash 1.3.6 Beta
« Reply #28 on: February 13, 2012, 05:19:18 pm »
What about the Pro Shift?



same thing.

the blinking settings configuration screen is the same


Mike0001

  • Approved Newbie
  • *
  • Posts: 10
    • View Profile
    • German Race07 Simracing
    • Email
Re: SimDash 1.3.6 Beta
« Reply #29 on: February 13, 2012, 05:43:31 pm »
i changed some settings and closed without saving manually and after restarting it was like before. fine

but i only tested on case.

Mike

do you mean it didn't save?

thank you




It saved everthing ok.
to finish 1st you have to finish first

 

hit counter