Help @DLC-247 Turn Signal setup for ATS/ETS2

[Jantlotus/Dio]

As the topic says i need some help here. When looking at the spreadsheet, ETS2 is listed with turnsignals. So i putted up some leds on my dlc247 for this purpose and test it with LFS and it worked, but i cant get them to work with ETS2. So what am i doing wrong here?

[Cristiano]

Hello.
to be 100% that the game is giving information about turning lights, the best test you can do is starting SImDash and ETS2. In SimDash open the "View->Data" menu. Activate turning lights in the simulator and check if the "View->Data..." page shows that turning lights are ON.

If it doesn't, it could be that ETS2 stopped giving this information or that SimDash needs some change.

Please do the test, and I will see what I can do..
thanks
Cristiano

[Cristiano]

Hello.
Another thing, turning lights have been added to ETS2 on the 29th of June 2016.
So if you downloaded Simdash before that day, uninstall it and download a fresher copy from the website.

And configure the ETS2 plugin again, in Simdash.

Thanks

[Jantlotus/Dio]

Thank you, i will try that. But as i can see i have the newest SimDash from the site (Updated 24/3-2016) Cant seem to find a newer one.

UPDATE: Installed SimDash again and im getting output for turnsignals in ATS and ETS2. Just have to figure out why my watertemp icon on the cluster suddenly act as turnsignal. TY again for the help and support.

[Cristiano]

good news.
Let me know if you need any help.

regards
Cristiano

[Jantlotus/Dio]

Hi again and sorry to bother you. i spoke to soon. But there's something really wrong here (for me that is).

Have connected a led for turnsignal on the DLC247 to "Display 16 - LED G" and that works and indicate the right way in LFS. When i use the same setup in ATS or ETS2 the "Water Temp Warn" led is acting as turn signal (Happened after installing SimDash again) and that is connected to "Display 8 - LED E". I really dont understand a thing right now. Could you please "brainstorm" with me on this?

"SimDash View Data" for ETS2/ATS indicates "water temp" on when using turn signal. "Turn Left/Turn Right" says OFF.

[Cristiano]

so it looks like the problem is with the ETS2 plugin in SimDash, that switch the water temp warning light on instead of the turning light.
I think your setup is correct.

Let me have a look at the ETS2 plugin to see if I find what is wrong.

Regards

Hi again and sorry to bother you. i spoke to soon. But there's something really wrong here (for me that is).

Have connected a led for turnsignal on the DLC247 to "Display 16 - LED G" and that works and indicate the right way in LFS. When i use the same setup in ATS or ETS2 the "Water Temp Warn" led is acting as turn signal (Happened after installing SimDash again) and that is connected to "Display 8 - LED E". I really dont understand a thing right now. Could you please "brainstorm" with me on this?

"SimDash View Data" for ETS2/ATS indicates "water temp" on when using turn signal. "Turn Left/Turn Right" says OFF.

[Cristiano]

When you installed the new SimDash, did you configure the ETS2 plugin in Simdash? (you have to select the ETS2  installation folder...)

[Jantlotus/Dio]

Yes i configed it again pointing to the right folder

video: https://1drv.ms/v/s!Aun-ozcPPpLzjlg0F4wnPNZUBfHJ

[Jantlotus/Dio]

Still no luck solving the issue or wip?

[Cristiano]

Hello.
The week that just finished was a bit crazy and didn't have the time to look at the problem.

But I should be able to do in the next days.

Thanks

[Cristiano]

Hello.
I think the turning lights are now working with ETS2.

What you have to do is to uninstall SimDash v.10 and download and install it again from the website.

Remember to reconfigure the ETS2 and ATS plugins in SimDash.

Let me know if you have any problem.

regards
Cristiano

[Jantlotus/Dio]

The turning signals are working now for ATS/ETS2. The only difference from before is when i turn the ignition on is that "oil pressure warn" and "battery warning" lights up, as earlier it was "water temp warn" and "oil pressure warn". Cheers!

Hello.
I think the turning lights are now working with ETS2.

What you have to do is to uninstall SimDash v.10 and download and install it again from the website.

Remember to reconfigure the ETS2 and ATS plugins in SimDash.

Let me know if you have any problem.

regards
Cristiano

[Cristiano]

The turning signals are working now for ATS/ETS2. The only difference from before is when i turn the ignition on is that "oil pressure warn" and "battery warning" lights up, as earlier it was "water temp warn" and "oil pressure warn". Cheers!

What you have now is the correct behaviour. There was a bug in the way warning lights were handled.

[Jantlotus/Dio]

Love it alot mate. Keep up the good work 

Here's a video how it looks now:

https://1drv.ms/v/s!Aun-ozcPPpLzjma7NeoE2JhXAMyY