Brake Bias and Anti-Roll Bar Info for Simscreen?

[Cristiano]

I have made some changes:

https://dl.dropbox.com/u/3544050/SimDash.rar

Does it look better now?

Thank you

[Mezevenf]

Hey Cristiano,

Looks better yes, except now the Brake Bias seems to be rounding up to the nearest full number instead of showing the two decimal places (which is required as generally it moves in 0.25% increments). The Front and Rear Antiroll Bars now shows the single digit which works fine (excluding the Lotus which is still showing 0 for soft and throwing the rest out by 1). I have attached some pictures to demonstrate.

[Cristiano]

Is it correct now?

https://dl.dropbox.com/u/3544050/SimDash.zip

Thank you for your
help

[Mezevenf]

Great! It might be better off showing the brake bias as all 4 digits instead of removing the trailing 0s. Eg it now shows 62, 62.25, 62.5. It'd be better if it was 62.00, 62.25, 62.50 etc.

The Lotus still shows bars out by 1 but thats not a huge deal I dont think. Not much you could really do unless it was possible to offset by 1 the value based on the car you're in.

Thanks!

[Cristiano]

Great! It might be better off showing the brake bias as all 4 digits instead of removing the trailing 0s. Eg it now shows 62, 62.25, 62.5. It'd be better if it was 62.00, 62.25, 62.50 etc.

The Lotus still shows bars out by 1 but thats not a huge deal I dont think. Not much you could really do unless it was possible to offset by 1 the value based on the car you're in.

Thanks!

Hello.
If you want Brake Bias to be displayed  with two decimal figures, you have to change (in the SimScreen editor) the "Format" property to:

{0:0.00}

I am going to update SimDash with these changes and some bug fixing.
Thank you for the time spent testing this stuff.

Actually, I think I have found other values for IRacing but for a series of reasons I can't test them easily.

Would you like to help?

Cheers
Cristiano

[Mezevenf]

Great! It might be better off showing the brake bias as all 4 digits instead of removing the trailing 0s. Eg it now shows 62, 62.25, 62.5. It'd be better if it was 62.00, 62.25, 62.50 etc.

The Lotus still shows bars out by 1 but thats not a huge deal I dont think. Not much you could really do unless it was possible to offset by 1 the value based on the car you're in.

Thanks!

Hello.
If you want Brake Bias to be displayed  with two decimal figures, you have to change (in the SimScreen editor) the "Format" property to:

{0:0.00}

I am going to update SimDash with these changes and some bug fixing.
Thank you for the time spent testing this stuff.

Actually, I think I have found other values for IRacing but for a series of reasons I can't test them easily.

Would you like to help?

Cheers
Cristiano

I'd be more than happy to

[Mezevenf]

Bump I noticed this isnt in the official release yet.

[Cristiano]

Bump I noticed this isnt in the official release yet.

Sorry for delay.
I have a quite long list of updates I have to do, including new data values for IRacing.
At the moment I am spending all the available time to complete the software for the new controller (rev burner type controller). After that, I will implemented all the things I have promised to do but I haven't done yet.

thanks

[Mezevenf]

No problem, thanks!

Any chance I could get a hold of that beta release again like is linked above?

[danopoker]

Christiano ... bit of a thread hijack here but could that data (brake bias, roll bar settings) be integrated into the DLC-248 as well?  I would LOVE to be able to display brake bias especially (referring specifically to iRacing here).  Thanks for considering!

And many thanks for the work you have already done. 

[Cristiano]

I will definitely do it.
Now that the Pro-Gauge controller is finished I will have more time to do these small improvements.

Regards

[danopoker]

That will be great... thanks!!!

[Mezevenf]

I will definitely do it.
Now that the Pro-Gauge controller is finished I will have more time to do these small improvements.

Regards

Awesome, if you need any more help testing more than happy.

[danopoker]

Christiano ... bit of a thread hijack here but could that data (brake bias, roll bar settings) be integrated into the DLC-248 as well?  I would LOVE to be able to display brake bias especially (referring specifically to iRacing here).  Thanks for considering!

And many thanks for the work you have already done. 

Hi Christiano... just a reminder that this would be great to have... especially for cars like the Lotus 79 in iRacing. 

[Cristiano]

it's going to be included in the next version of SImDash,

Regards
Cristiano