MY Symprojects Homemade Dashboard

[David91]

Hello. I'm selling my homemade dashboard, recently I have quit online racing so I don't need it anymore.

The board consist of(READ: what you get):

- 2x DLC247 (£99 GBP)

- 1x JC32 Joystick controller (£25.50)

- 6x DLC247 pin-splitter (£15.00)

- 7x 0.56" Three digit display for DLC-247 (£41.65)

- 1x 0.36" Six digit display for DLC-247 (£6.95)

- 1x 0.56" display for DLC-247 (£5.95)

- 75 5mm Leds (£7.50)

- 16 Push Buttons (aprox. £15.00)

- 3x Rotary Encoder (£11.85)

- 3 usb cables to connect to the PC (aprox. £6.00)

- 4 aluminium boards with machined holes and painted in black (aprox. £150)

[David91]

The parameters I used:

FIRST BOARD(aka. SETUP BOARD):

- Fuel(Liters) ( 3-digit display)
- Oil Temp(°C) ( 3-digit display)
- Water Temp(°C) ( 3-digit display)
- Led's for FLAGS (Green flag, Blue flag, Red flag, Yellow flag 3 LED's for each sector)
- Brake Temp(3 LED's for each wheel (blue, yellow and red in °C)
- Wheel Temp(3 LED's for each wheel (blue, green and red in °C)

SECOND BOARD(aka. MAIN BOARD):

- Water Temperature (5 LED's 2xBlue, 1xYellow, 1xGreen, 1xRed)
- Oil Temperature (5 LED's 2xBlue, 1xYellow, 1xGreen, 1xRed)
- RPM Meter(4 Green LED's,6 Red LED's and 4 Blue LED's)
- Speed(3 digit display)
- Gear(1 digit display)
- Last lap time(6 digit display)
- Fuel (1 Red LED, 2 Yellow LED's, 3 Green LED's)

[David91]

THIRD BOARD(aka. BUTTON BOARD)

The buttons:

- Lights (above the button is a Blue LED to show that the lights are on)
- Wipers (above the button is a Blue LED to show that the wipers are on)
- Request Pit Stop (above the button is a Green LED to show that you requested a pit stop)
- Pit Speed Limiter (above the button is a Green LED to show that you pit limiter is ON)
- Engine Contact (above the button is a Red LED to show engine contact)
- Start Engine
- Rotary encoder for setting(Wing, ARB, etc.)
- there are 2 LED's left of the rotary encoder that show 1x You are in the pits and 1x Red LED Engine Fail

Displays:

- Cars on track(3 digit display)
- My position ( 3 digit display)
- Turbo Pressure (3 digit display)

Under all the buttons is still space for a sim-screen ss1 just never made the hole and put it in.

FOURTH BOARD(aka. PIT BOARD)

THE BUTTONS:

- ROTARY ENCODER for setting Brake Bias ( front or back)
- ROTARY ENCODER for setting Boost (low to high)
- Button for Launch Control
- Button for FFB reset
- Button for YES
- Button for NO
- Button for CHAT
- PIT buttons UP, DOWN, INCREASE, DECREASE and CONFIRM

LED's:

- Traction Control
- ABS
- Fuel Prssure (3 LED's Green, Yellow, Red)
- Water Temp Warning
- Oil Temp Warning
- Fuel Pressure Warning

[David91]

I ship the board as it is on the pictures. Fully build and connected and already assembled on the 4 boards. I can also send my configuration file or help setup the board via mail or skype. The board is fully functional and ready to go. The board is powered by the usb cables no external power supply required.

All new it was aprox. £400 or in my case 475€ without shipping and work. I hope to sell it for 290€ (or £250 + shipping).
You can contact me by PM or lorencic.david@hotmail.com for more pictures or questions 

[David91]

Price lowered: 200€+SHIPPING