A range of 14.2mm (0.56in high) seven segment displays available in red, blue and white (for the JC-LED controller only RED is available).

The display is already soldered on a PCB with a pin header connector. A set of 300 mm long cables connects the display to the DLC-247 controller.

Connections work as follow.


For the DLC-247 controller:

  • Pins 1…8 of the display connect to pins 1…8 or pins 9…16 of connector A or B or C of the DLC-247
  • Pin A of the display connects to pin 17 or 18 or 19 or 20 of the DLC-247 (same connector used above)
  • Pin NC of the display is not used


For the JC-LED controller:

  • Pins 1...8 of the display connect to pins S1...S8 of the JC-LED
  • Pin A of the display connects to one of the D1...16 pins of the JC-LED
  • Pin NC of the display is not used

0.56" display for DLC-247 or JC-LED

  • Product Code: 0.56" display for DLC-247 or JC-LED
  • £5.95


Available Options


Related Products

DLC-247

DLC-247

Please note: the DLC-247 controller is not available any more, due to come components being out of p..

£49.50

JC-LED

JC-LED

The JC-LED controller is a new USB board that combines: a JC32 controller (push buttons, togg..

£38.00