1
Show off your build / Re: My WIP dashboard / cockpit
« on: June 22, 2013, 10:39:09 pm »
hello
here my settings for watertemp
here my settings for watertemp
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
Show off your build / Re: My WIP dashboard / cockpit
« on: June 17, 2013, 04:52:14 pm »
Hello
i can write u the correct parameters next weekend my symprojekt is on a other place iam working (mo-Fr) :-)
but this parameter all under 20% that is right ......
I thing the 120 C are 10-15% and the other all smaler !
Nice greets
i can write u the correct parameters next weekend my symprojekt is on a other place iam working (mo-Fr) :-)
but this parameter all under 20% that is right ......
I thing the 120 C are 10-15% and the other all smaler !
Nice greets
3
Show off your build / Re: My WIP dashboard / cockpit
« on: June 15, 2013, 07:23:58 pm »
ups sry i see :-)
Only the fuel gauge make problems :-( there will not work @ the moment
but i will test
Only the fuel gauge make problems :-( there will not work @ the moment
but i will test
4
Show off your build / Re: My WIP dashboard / cockpit
« on: June 15, 2013, 03:49:23 pm »
Hello
I hope thats right way to make work the temp gauges .....
Pin 16 on blue connector must be to +12V than my temp gauges will work !!! :-)
Connect only the input (pin 18) to Pro Gauge for temp gauge
my temp gauge is now working correctly ! but i have no time to test with many Mods in rfactor also i can say my fav Mod is working !!
nice greets Wolfi
I hope thats right way to make work the temp gauges .....
Pin 16 on blue connector must be to +12V than my temp gauges will work !!! :-)
Connect only the input (pin 18) to Pro Gauge for temp gauge
my temp gauge is now working correctly ! but i have no time to test with many Mods in rfactor also i can say my fav Mod is working !!
nice greets Wolfi
5
Show off your build / Re: My WIP dashboard / cockpit
« on: June 03, 2013, 09:37:47 pm »
hi again :-)
which Pin or coulor of wire u use for Ignition function (on video is that @17sec ) pls can u tell me this .....
Maybe u can make a wire diagramm or a pic which pins are use for some function
Here a pic of My BMW E36 Cockpit :-)
which Pin or coulor of wire u use for Ignition function (on video is that @17sec ) pls can u tell me this .....
Maybe u can make a wire diagramm or a pic which pins are use for some function
Here a pic of My BMW E36 Cockpit :-)
6
Show off your build / Re: My WIP dashboard / cockpit
« on: June 03, 2013, 09:30:45 pm »
Hi
Nice to see that many people use the BMW gauges :-)
Follow the other Thread for this maybe that can u help
http://www.symprojects.com/forum/index.php?topic=38.45 Post "54" is the answer about the temp gauges....
I use the pro gauge and it works FINE :-) but only the FUEL make troubles :-( but i will find a way to make that work ........
I will post when i find a way ........
nice greets from austria
lg Wolfi
Nice to see that many people use the BMW gauges :-)
Follow the other Thread for this maybe that can u help
http://www.symprojects.com/forum/index.php?topic=38.45 Post "54" is the answer about the temp gauges....
I use the pro gauge and it works FINE :-) but only the FUEL make troubles :-( but i will find a way to make that work ........
I will post when i find a way ........
nice greets from austria
lg Wolfi
7
Show off your build / Re: My cockpit build WIP
« on: May 31, 2013, 08:35:19 pm »
Hello
PIN4 is for Speedmeter and the other Pin1 and 3 is for Fuel but not work :-(
PIN4 is for Speedmeter and the other Pin1 and 3 is for Fuel but not work :-(
8
Show off your build / Re: My cockpit build WIP
« on: May 31, 2013, 04:28:38 pm »
Hello Jadran
Thx for your tip
The watertemp is now working but when it work the light on the cluster is darker.The FUEL not work with the x16 (white connector) pin 21 is fuel consumption signal
only the "moment fuel use gauge " under the RPM gauge is sometimes works but not right :-( all other pins for "FUEL" give me no result to work !
i dont can understand this at the Moment :-(
Other question about the light for cluster can i make it with an switch ? which wire or pins for the light !! Maybe i want make the Cluster Light with an extra Power Supply ....
Ps: The new Pro Gauge is nice REALLY 1000 Thx to Cristiano :-)
Thx nice greets from austria WOLFI :-)
Thx for your tip
The watertemp is now working but when it work the light on the cluster is darker.The FUEL not work with the x16 (white connector) pin 21 is fuel consumption signal
only the "moment fuel use gauge " under the RPM gauge is sometimes works but not right :-( all other pins for "FUEL" give me no result to work !
i dont can understand this at the Moment :-(
Other question about the light for cluster can i make it with an switch ? which wire or pins for the light !! Maybe i want make the Cluster Light with an extra Power Supply ....
Ps: The new Pro Gauge is nice REALLY 1000 Thx to Cristiano :-)
Thx nice greets from austria WOLFI :-)
9
Show off your build / Re: My cockpit build WIP
« on: May 29, 2013, 10:04:05 am »
Hello Jadran
Maybe YOU can help me pls :-)
I use the NEW Progauge controller with the BMW E36 gauges ...
RPM and SPEED works perfect but i dont can find the right wire to USE for TEMP and FUEL any wire in your picture what is for this 2 gauges not work .
Maybe i must any -12V and +12V find do make it work but which one ? So maybe u can help me pls and u can say me what coulors or pins i need to bring that work !!
Thx Nice greets from AUstria :-)
Wolfi
Maybe YOU can help me pls :-)
I use the NEW Progauge controller with the BMW E36 gauges ...
RPM and SPEED works perfect but i dont can find the right wire to USE for TEMP and FUEL any wire in your picture what is for this 2 gauges not work .
Maybe i must any -12V and +12V find do make it work but which one ? So maybe u can help me pls and u can say me what coulors or pins i need to bring that work !!
Thx Nice greets from AUstria :-)
Wolfi
10
General Discussions / Re: Have a 997 Porsche Cluster - Will the Pro-Guage work to control it?
« on: May 14, 2013, 08:39:49 pm »
hello
maybe this can u help ...... is with google translate
http://translate.google.at/translate?hl=de&sl=de&tl=en&u=http%3A%2F%2Fwww.pff.de%2Fporsche%2Fboard104-porsche-modelle%2Fporsche-tuning-umbau%2F2708363-997-kombiinstrument-steckerbelegung%2F
maybe this can u help ...... is with google translate
http://translate.google.at/translate?hl=de&sl=de&tl=en&u=http%3A%2F%2Fwww.pff.de%2Fporsche%2Fboard104-porsche-modelle%2Fporsche-tuning-umbau%2F2708363-997-kombiinstrument-steckerbelegung%2F
11
General Discussions / Re: Rev Counter + Other Gauges
« on: May 13, 2013, 07:49:01 pm »
THX so much ...... 
12
General Discussions / Re: Rev Counter + Other Gauges
« on: March 27, 2013, 11:20:16 pm »
Hello
Any news about the RELEASE date for the NEW REV BURNER and Gauges ?
Maybe we can buy after the EASTER Holidays ?
Nice greets from Austria
Wolfi M
Any news about the RELEASE date for the NEW REV BURNER and Gauges ?
Maybe we can buy after the EASTER Holidays ?
Nice greets from Austria
Wolfi M
13
General Discussions / Re: Rev Counter + Other Gauges
« on: January 03, 2013, 09:00:07 am »
Great News Cristiano
Thx for ur good work pls notify when this.Board is ur Shop
Nice greets from austria. Wolfi
Thx for ur good work pls notify when this.Board is ur Shop
Nice greets from austria. Wolfi
14
General Discussions / Re: Rev Counter + Other Gauges
« on: November 15, 2012, 12:45:50 am »
Maybe u will have right but I like to dream .
This was my biggest dream for christmas this year
The timepoint is perfect then I can start my project.
Nice greets from Austria wolfi
This was my biggest dream for christmas this year
The timepoint is perfect then I can start my project.
Nice greets from Austria wolfi
15
General Discussions / Re: Rev Counter + Other Gauges
« on: November 13, 2012, 09:22:49 pm »
Very good News !!!!!!!!!
Maybe its also avaible for christmas !!! juhu 
Maybe its also avaible for christmas !!! juhu
Pages: [1] 2
