Messages

1

General Discussions / Race start lights

« on: March 30, 2014, 11:25:01 am »

Hi is there support at all for start lights? Ie 2 or 3 red lights that go out when race starts and maybe have a green come on for short time? Im mainly looking for rfactor. Thanks

2

General Discussions / Re: Euro Truck Sim 2

« on: November 26, 2013, 10:40:11 am »

Hi guys, I can't get any gears above 9 to display at all. I've tried using SPI-D and DLC247 all with multiple digit displays but will only display to 9th gear. Am I missing something?

3

General Discussions / Re: plz help! Rev Burner not detected by Sim Dash 1.3.5 and 1.3.6

« on: January 07, 2013, 08:57:01 am »

Hey Cristiano
I'm having an issue with one rev burner. I turned PC on as usual today and windows detected it as a bootloader device (or something similar) Anyway Simdash doesn't see it so I thought I'd reflash the software on the board.
When I open bootloader the board is recognised and flash is successful (I've flashed both versions of firmware) but the funny thing is no matter where the jumper is or even if it removed the bootloader still sees it and Simdash doesn't. Any ideas? oh by the way it's a V2.
The other Rev Burner and all other hardare is still working fine.

Thanks
Ricky

4

General Discussions / Re: Rev Counter + Other Gauges

« on: June 26, 2012, 12:28:26 pm »

Hi Cristiano
Just wondering if the new rev burner has utilised the S2 pin yet? Ie can we run a rev counter and speedo off the same board? I'm looking at starting another setup and trying to price it all up.

Thanks

5

General Discussions / Re: SimDash 1.3.6 Beta

« on: April 12, 2012, 11:09:28 am »

Hi Cristiano
Just wondering if you got my email about simdash? It died on me.

Cheers
Ricky

6

General Discussions / Mondeo Cluster wiring

« on: January 17, 2012, 10:40:29 pm »

Hi guys
I have a 2002 Ford Mondeo cluster that I need to wire up, does anyone have any info or wiring diagram for these by any chance? I've looked at the earlier post showing a mondeo piinout that Cristiano had but this is different as it has one connecto on the back not two.

P.S. Cristiano, new proshift and LED's turned up. Thanks so much for all your help.

Thanks
Ricky

7

General Discussions / Re: SimDash crashes when I click "OK"

« on: January 04, 2012, 05:09:40 am »

Hi, yes that seems to be the problem. Thanks

8

General Discussions / Re: Proshift and Rev Burner stopped working

« on: January 03, 2012, 01:15:59 am »

My proshift has stopped workng, or atleast half of it has. Zone 1 and 2 work fine but the rest has stopped. Don't even show any lights in the configureation screen. I have upgraded the firmware, tried connecting the LEDs that work on Zone 1 to the other zones and tried different USB calbes and ports but still only Zone 1 and 2 work. I'm not having much luck at the moment.

9

General Discussions / Re: SimDash crashes when I click "OK"

« on: January 03, 2012, 01:12:36 am »

Hi Cristiano
Any luck with the crashing issue with 135? I'm having the same problem and it's starting to get annoying. It mainly seems to be when editing the DLC board but happens other times as well. Once you have the main Simdash screen up you can't do anything with it. Exiting doesn't work and closing via Task manager doesn't help either as windows still thinks it's open when you try and restart simdash. Only way is to restart computer. I'm also having a couple of other issues that i will outline in the appropriate thread.

10

General Discussions / Re: DLC-247

« on: January 02, 2012, 10:56:04 am »

Yeah I'm a little confused now as well. I've brought the whole package as I was told it will work but now I'm told it won't. One thing I think I have figured out is the shift array on the video sin't the premade shift array Christiano is selling, I think it's seperate LEDs instead.
My issue is I'm trying to use the array which shares pins for everything. I think in your case you will be ok as you have a seperate pin for every LED and you will then have to create some double connectors to join those LEDs to the board. Each LED will have it's own pin 1-16 on one side of the LED and thin 'I think' all share pin 20 on the DLC which does not need to be occupied by the 6 digit displays as they only use 19 pins each.
Well that is now my understanding anyway.

11

General Discussions / Re: DLC-247

« on: December 31, 2011, 01:59:06 am »

So does that mean I can't use the shift array and three six digit displays?
The best I can do is 2x 6 digit, half of the next 6 digit and full shift array including gear indicator. Can't get the other half of the 6 digit connected.
I have currently got the three 6 digit displays connected which use all pins except for pin 20 on each bank. Is there a way I can connect the full array to this? Looking at the total number of displays this can handle it should be possible but I just can't get it.

Thanks

12

General Discussions / Re: Which Clusters/Speedos will work?

« on: December 29, 2011, 02:01:03 pm »

Thanks, I figured that out just after I posted my last comment, typical lol. Still no go, was actually on 5v already and didn't realise it. Tried upgrading the firmware to try the speedo with the new rev burner but that still didn't work. Starting to think I'm not feeding the right signal into it. The cluster has a couple of networks running through it so I guess it needs another signal from there, oh well I'll keep looking for another one.

13

General Discussions / Re: DLC-247

« on: December 29, 2011, 11:49:36 am »

Thanks for the quick reply. Sorry I didn't see the lettering on the picture before. Makes perfect sense now lol. There is nothing wrong with the third display, like you said the pins are already used and I'm scratching my head a little when it comes to adding the third. The wires them selves are no problem I'll just alter some of the extra leads I purchased, it's just what pins to put them on.
I know to get the third one up and running I need to use two sets of displays from A,B and C as each bank is running 6 at the moment but that's about it. I'll get it sorted eventually.
I will change the lap time to mins and seconds ans see how that goes.

Thanks

14

General Discussions / Re: Which Clusters/Speedos will work?

« on: December 29, 2011, 11:44:01 am »

Hi, one is a Rev 2, I see a jumper on it says 5v-12v. So does that mean if I remove the jumper it will be 5v? The other that i just got today is a rev 4, no jumpers and only one set of holes for programming.

Thanks

15

General Discussions / Which Clusters/Speedos will work?

« on: December 29, 2011, 10:49:43 am »

Hi guys
Can anyone give me and the rest of us a idea of what clusters will work with a rev burner? I got myself a nice Jag XJR cluster but it won't work as it requires a 5v signal and the rev burner outputs a 12v.
Any help would be appreciated.

Thanks
Ricky