This tachometer offers extremely fast  movements. The main features are:

• It uses high precision and high speed stepper motor.
• 11000 RPM and 80mm diameter.
• External shift light, green and red.
• 2 programmable shift points.
• Optionally the tachometer will beep when the second shift point is reached.
• 7 background colors available.
• Opening and closing ceremonies. Different movements to choose from.

Connecting the tachometer to the Pro-Gauge or Rev-Burner controllers

Connection the tachometer to the Pro-Gauge or to the Rev-Burner controllers is extremely easy.

• Connect the BLACK wire to the GND terminal of the Pro-Gauge or Rev-Burner controller.
• Connect the GREEN wire to the RPM terminal of the controller.
• Connect the RED, YELLOW and PINK wires to the 12V terminal of the controller.

This is the simplest way to connect the gauge but there is one small problem: the backlight of the tachometer will stay ON all the time, even when not racing. the only way to switch the backlight OFF is disconnecting the power supply from the Pro-Gauge or Rev-Burner controllers.

Connecting the tachometer using the relay module

For a cleaner installation we suggest to use the Pro-Gauge controller and the Relay Module. This way the backlight of the tachometer will be automatically switched ON and OFF when SimDash is started and stopped. The gauge will also display the opening and closing ceremonies when it starts and stops.

Connecting the gauge to the Pro-Gauge and relay module is simple and it is shown in the picture below. The color of the wires in the picture is the same as the color of the tachometer's wires.

Setting up the first shift point

When the first shift point is reached, the shift light will lit green.  To set the RPM value for the first shift point, follow these instructions:

• Keep the  button pressed for two seconds.
• Use the  and  buttons to adjust the RPM value.
• Don't press any button for 5 seconds to return to normal mode.

Setting up the second shift point.

When the second shift point is reached, the shift light will lit red and optionally the tachometer will start beeping.

• Keep the  button pressed for two seconds.
• Use the  and  buttons to adjust the RPM value.
• Don't press any buttons for 5 seconds to return to normal mode.

Changing backlight color

There are 7 backlight colors available. To choose one of them, follow these steps:

• Press the  button twice.
• To cycle through the available colors, press the  button.
• When done, don't press any button for 5 second to return to normal mode.

Changing the backlight brightness

• Press the  button.
• Cycle through the brightness levels, pressing the  button multiple times.
• When done, don't press any button for at least 5 seconds to return to normal mode.

Changing the opening and closing ceremonies

Opening and closing ceremonies are the needle and light sequences that the gauge performs when it is started and stopped. To change them, follow these steps:

• Press the  button twice.
• Cycle through the available ceremonies, pressing the  button.
• When done, press the  and  buttons at the same time to return to normal mode.

Changing the buzzer mode

The tachometer beeps when shift point 2 is reached. this sound can be switched ON and OFF, following these steps:

• Press the  and  buttons at the same for at least 2 seconds.
• To switch the buzzer ON and OFF, press the  button.
• Don't press anything for 5 seconds to return to normal mode.

Changing the number of cylinders

By default the tachometer is configured to work with 4-cylinders engines and this setting should not be changed in any case. But in case you change this value and want to set it back to 4, follow these steps:

• Press the  and  buttons at the same for at least 2 seconds.
• Change the number of cylinders pressing the  button multiple times until the needle points the value 4.
• Don't press anything for 5 seconds to return to normal mode.

Download instructions manual

Instructions Manual can be download here.